The hardware monitor defaults as per datasheet are 0x0000 / 0, but on
hardware that uses this functionality it seems to be 0x290 / 5 often,
thus use those values in the dts.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1034 f3766cd6-281f-0410-b1cd-43a5c92072e9
up a function prototype.
Fix up #include statements for W83627THG SuperI/O stage2 code.
Use anonymous instead of named unions in struct device.
Point pnp_dev_info members to w83627thg_ops.
Disable UART and keyboard initialization for now.
Add new code in phase3_chip_setup_dev to fill in configuration values
from the dts (code is partially disabled).
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1032 f3766cd6-281f-0410-b1cd-43a5c92072e9
Parts of this patch (southbridge/intel/i82801gx/smi.c) were
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
The rest is
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1031 f3766cd6-281f-0410-b1cd-43a5c92072e9
The build system isn't even using it so far, but if it would the
build would break (and the code wouldn't work for this hardware).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1030 f3766cd6-281f-0410-b1cd-43a5c92072e9
It shouldn't break anything that was working, but I didn't try to fix SuperIOs
that weren't compiling when I started.
Compile tested on
1. amd/dbm690t for ite/it8712f
2. amp/tinygx for ite/it8716f
I'd already updated fintek/f71805 before I realized jetway doesn't compile.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1028 f3766cd6-281f-0410-b1cd-43a5c92072e9
in.
include/device/pnp.h:
Add enable, val, and irq & drq structs.
superio/winbond/w83627hf/superio.c:
Change functions to operate on children.
Add device ID to ops.
Add enables to pnp_dev_info table.
Fill in dts values.
superio/winbond/w83627hf/dts:
Get rid of device number parameters.
Add config parameters so we know when they're set.
device/pnp_device.c:
Allocate devices as children to SuperIO.
mainboard/amd/serengeti/dts:
Move ioport so it's found. (Not its permanent resting place I hope.)
Add enables for KBC, SP1, and HWM to show it off.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1027 f3766cd6-281f-0410-b1cd-43a5c92072e9
/home/rminnich/coreboot-v3/build/coreboot.initram_partiallylinked.o: section .data.rel.ro.local: dual_channel_slew_group_lookup.3242 single_channel_slew_group_lookup.3243
and
/home/rminnich/coreboot-v3/southbridge/intel/i82801gx/smbus.c:34: error: conflicting types for ‘smbus_read_byte’
include/device/smbus.h:56: error: previous declaration of ‘smbus_read_byte’ was here
we are working these. The second is much harder than it seems.
It concerns whether we put i2c devices (i.e. DRAM spd SEEPROMS) in the dts.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1026 f3766cd6-281f-0410-b1cd-43a5c92072e9
Comment out not-yet-supplied initialize_cpus.
Fix missing ; in smbus.c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1025 f3766cd6-281f-0410-b1cd-43a5c92072e9
include/device/path.h
Make path_eq take const path*.
include/device/device.h
Use const with dev_path, dev_id_string, bus_path, find_dev_path,
andalloc_find.
device/device.c
Add functions for tree printing of devs and resources.
Change %p to more useful info.
device/device_util.c
Use const changes from device.h.
lib/stage2.c
Use updated printing functions.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1024 f3766cd6-281f-0410-b1cd-43a5c92072e9
Lots more to do.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1023 f3766cd6-281f-0410-b1cd-43a5c92072e9
It includes an ide option that has to be there, and fixes a CPU test in
Kconfig.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1021 f3766cd6-281f-0410-b1cd-43a5c92072e9
Make statics non-static (we don't do buildrom any more)
Index: northbridge/intel/i945/raminit.c
remove snarf-o that left k8 in (I used wrong script I guess?)
Index: southbridge/intel/i82801gx/stage1_smbus.c
static to global
Index: mainboard/kontron/986lcd-m/stage1.c
Remove functions that have to be in initram.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1020 f3766cd6-281f-0410-b1cd-43a5c92072e9
Index: arch/x86/intel/core2/stage1.c
Initial core2 disable_car and stop_ap
disable_car is wrong but we can fix that tomorrow -- it's core 2 day on friday!
Index: arch/x86/via/stage1.c
Add empty stop_ap()
Index: mainboard/kontron/986lcd-m/stage1_debug.c
Cleanup
Index: mainboard/kontron/986lcd-m/initram.c
Cleanup
Index: mainboard/jetway/j7f2/stage1.c
Remove definition of stop_ap; this belongs in the cpu!
Index: southbridge/intel/i82801gx/libsmbus.c
Fix definition of TIMEOUT (i.e. remove it)
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1019 f3766cd6-281f-0410-b1cd-43a5c92072e9
* Uncomment the dbe61a SPD table
* Modify spd_read_byte to support a DIMM SPD address at DIMM_DBE61A that outputs data from dbe61a SPD table instead of dbe61c; approach tip from Marc Jones
* In main() after setting up DBE61C 256MB RAM, run a ram_check, and if that returns a greater than zero verify error count set up 128MB for DBE61A instead
* Tweak the dbe61a SPD table to result in LX MSR values as known to work in Artec v2 branch - this is DBE62/DBE61C values, with density and NUM_COLUMNS halved, and some timings tweaked according to the v2 results.
Now memtest86+ is quite happy on both DBE61C and DBE61A.
Note that it should be better to ram_check in the high memory areas, but that doesn't seem to currently work.
Low memory check seems fine for the immediate time being, as the results appear shifted there as well with the wrong size/timing setup.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Good enough for now.
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1018 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1017 f3766cd6-281f-0410-b1cd-43a5c92072e9
Then we can later use it for re-initializing for different SPD without code duplication.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1016 f3766cd6-281f-0410-b1cd-43a5c92072e9
This is in preparation of dbe61a handling addition.
Uses DIMM_DBE61C and DIMM_EMPTY instead of generic DIMM0/DIMM1, and
spd_table_dbe61c instead of spd_table.
Also removes a completely unused smb_devices structure definition.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1015 f3766cd6-281f-0410-b1cd-43a5c92072e9
Will be necessary for DBE61 automatic memory size selection.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1014 f3766cd6-281f-0410-b1cd-43a5c92072e9
This is a complete rewrite of my earlier stack checker proposal.
It works for CAR and RAM, has better abstraction and actually gives us
nice results.
The stack checker is default off due to its rather measurable impact on
boot speed.
Diagnostic messages are printed on first initialization, directly after
RAM init and directly before passing control to the payload. Sample qemu
log is attached. Extract from that log follows:
coreboot-3.0.986 Fri Nov 7 04:04:37 CET 2008 starting...
(console_loglevel=8)
Initial lowest stack is 0x0008fe98
Choosing fallback boot.
[...]
Done RAM init code
After RAM init, lowest stack is 0x0008fe30
Done printk() buffer move
[...]
LAR: load_file_segments: Failed for normal/payload
Before handoff to payload, lowest stack is 0x0008bf50
FATAL: No usable payload found.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1012 f3766cd6-281f-0410-b1cd-43a5c92072e9
processor to reset. Fix this bug and actually disable CAR.
With this patch v3 has better C7 CAR code than v2 (which skips two key
MTRRs).
Thanks to Corey Osgood for testing countless debug patches.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1010 f3766cd6-281f-0410-b1cd-43a5c92072e9
Why? Because the board doesn't use ide support. So you can't compile that in, it's not in the dts.
the mainboard Makefile picks the southbridge .c's to use.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1009 f3766cd6-281f-0410-b1cd-43a5c92072e9
and keep getting called away ... waiting for 1024 procs takes patience!)
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1008 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1007 f3766cd6-281f-0410-b1cd-43a5c92072e9
Also upper-cases the hex in lpc_serirq_polarity as all other Geode boards have it as such,
and remove parts of the commented out reference v2 setup block that should be handled by
this change now.
The USB power handling setting is meant to get the second pair of USB ports to be powered
on, as this changed done by Ron to DBE62 fixed DBE62's third and fourth USB port to be usable.
Oddly the USB power handling setting also makes memtest work, while without it memtest gets
unexpected interrupt halts right after it loads up.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1006 f3766cd6-281f-0410-b1cd-43a5c92072e9
Changes the interrupt router location to what all other Geode board ports are using, and
doesn't exclusively devote any IRQs for PCI usage, as no other Geode board does so.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1005 f3766cd6-281f-0410-b1cd-43a5c92072e9
This fixes one of the errors from using bison-2.4, but there are more.
This one in details is the following error:
BISON build/util/dtc/dtc-parser.tab.c
HOSTCC build/util/dtc/dtc-parser.tab.o
/home/leio/dev/coreboot-v3/util/dtc/dtc-parser.y: In function ‘yyuserAction’:
/home/leio/dev/coreboot-v3/util/dtc/dtc-parser.y:154: error: expected ‘;’ before ‘}’ token
make: *** [/home/leio/dev/coreboot-v3/build/util/dtc/dtc-parser.tab.o] Error 1
Note that 2.4.1 might be made to still work without the semi-colon for some languages, but I
understand 2.5 then still won't work without one. As it builds fine with this change with
bison-2.3, it should be safe to just add the semicolon.
The remaining error is the following:
/home/leio/dev/coreboot-v3/util/dtc/dtc-lexer.l: In function ‘yylex’:
/home/leio/dev/coreboot-v3/util/dtc/dtc-lexer.l:73: error: ‘yylval’ undeclared (first use in this function)
/home/leio/dev/coreboot-v3/util/dtc/dtc-lexer.l:73: error: (Each undeclared identifier is reported only once
/home/leio/dev/coreboot-v3/util/dtc/dtc-lexer.l:73: error: for each function it appears in.)
dtc-parser.tab.h doesn't seem to get an "extern YYSTYPE yylval" declaration, which per documentation should
only happen for pure parser cases ("%define api.pure"), but I can't find any such declaration in dtc to cause
the problem.
Note that upstream dtc builds fine with bison-2.4
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1004 f3766cd6-281f-0410-b1cd-43a5c92072e9
cpu setup is nonexistent. No car either. Work remains ...
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1000 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@999 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@998 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@997 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@996 f3766cd6-281f-0410-b1cd-43a5c92072e9
much of this builds.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@995 f3766cd6-281f-0410-b1cd-43a5c92072e9
This actually starts to get compile errors, instead of config errors.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@994 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@993 f3766cd6-281f-0410-b1cd-43a5c92072e9
Lots of wrong stuff here, but a lot of stuff is right. I am looking for
all the help I can get.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@992 f3766cd6-281f-0410-b1cd-43a5c92072e9
This is from v2. Once again, the pattern:
- save the chip name for the common enable parts, hence i82801gx.c
- remove the leading i82801_ from most other bits, since we compile
in different directories now
- Every device of a type has a distinct .c file (e.g. pcie.c)
- Each device of a type may be realized in more than one bit of silicon,
and have more than one set of operations, although code is common.
These are placed into distinct operations structs (see pcie.c)
- for every distinct device, there is a .dts file.
This set of rules makes for simple cross-part standardization of code.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@991 f3766cd6-281f-0410-b1cd-43a5c92072e9
sync as much as possible so the latest patches apply.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@990 f3766cd6-281f-0410-b1cd-43a5c92072e9
Fix the issue. OBJ->SRC conversions are a bit tricky to get right.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@989 f3766cd6-281f-0410-b1cd-43a5c92072e9
obvious that they are needed, so a comment to that effect will hopefully
prevent accidental "cleanups" in the future when nobody remembers the
history of that makefile rule anymore.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@988 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Marc Jones <marcj303@yahoo.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@986 f3766cd6-281f-0410-b1cd-43a5c92072e9
