Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1116 f3766cd6-281f-0410-b1cd-43a5c92072e9
offset_pciio and an offset_io. This makes it easier to port things from v2.
It also updates mcp55 and some whitespace there.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1099 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
It could use some cleanup, but looks good.
Acked-by: Peter Stuge <peter@stuge.se>
With some cleanup.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1085 f3766cd6-281f-0410-b1cd-43a5c92072e9
* Moves non-DRAM early init code out of initram and into stage1, where
it should have been in the first place
* Fixes an issue with GP3 timer causing system reboot (possibly not
present in current svn, but was present in my local copy)
* Fixes serial garbage from stage1 on jetway j7f2
* Fixes ROM mapping for flash > 512k on vt8237
* Makes a couple minor whitespace changes
* Moves some function prototypes to the headers where they belong
* Nukes some phase2 hackery that belongs in phase4 (eventually)
* Comments out early_mtrr_init() for via/epia-cn, this breaks booting on
jetway j7f2
* Moves troublesome SATA init code into stage1 - change of device class
hangs coreboot
* Gets to vt8237 IDE phase6 init and dies on jetway/j7f2:
Phase 6: Initializing devices...
Phase 6: Root Device init.
Phase 6: PCI: 00:10.1 init.
Primary IDE interface enabled
Secondary IDE interface enabled
<hang>
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1070 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1060 f3766cd6-281f-0410-b1cd-43a5c92072e9
This is a complete rewrite of my earlier stack checker proposal.
It works for CAR and RAM, has better abstraction and actually gives us
nice results.
The stack checker is default off due to its rather measurable impact on
boot speed.
Diagnostic messages are printed on first initialization, directly after
RAM init and directly before passing control to the payload. Sample qemu
log is attached. Extract from that log follows:
coreboot-3.0.986 Fri Nov 7 04:04:37 CET 2008 starting...
(console_loglevel=8)
Initial lowest stack is 0x0008fe98
Choosing fallback boot.
[...]
Done RAM init code
After RAM init, lowest stack is 0x0008fe30
Done printk() buffer move
[...]
LAR: load_file_segments: Failed for normal/payload
Before handoff to payload, lowest stack is 0x0008bf50
FATAL: No usable payload found.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1012 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@972 f3766cd6-281f-0410-b1cd-43a5c92072e9
CAR disabling operation. Untested, but it should work.
Please note that the code is incomplete, but that should at least not
affect stage2.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@945 f3766cd6-281f-0410-b1cd-43a5c92072e9
I am totally convinced these are right. I am going on travel for a week
and want these in your hands.
Carl-Daniel as acked these, but for lack of time to get firefox going
right now,
Current serengeti output
DRAM(40)01000000-00ffffff, ->(1), R, W, 2 nodes, 1
DRAM(48)01000000-00ffffff, ->(1), R, W, 2 nodes, 1
DRAM(50)01000000-00ffffff, ->(1), R, W, 2 nodes, 1
DRAM(58)01000000-00ffffff, ->(1), R, W, 2 nodes, 1
DRAM(60)00000000-00ffffff, ->(4), , , No interleave, 0
DRAM(68)00000000-00ffffff, ->(0), R, W, 8 nodes, 0
DRAM(70)00000000-00ffffff, ->(0), , , No interleave, 0
DRAM(78)00000000-00ffffff, ->(0), , , No interleave, 0
MMIO(80)01a00000-1100ffff, ->(0,2), , , CPU disable 0, Lock 0, Non
posted 0
MMIO(88)75060000-0000ffff, ->(2,0), , , CPU disable 0, Lock 0, Non
posted 0
MMIO(90)51040000-3f00ffff, ->(0,0), , , CPU disable 1, Lock 0, Non
posted 0
MMIO(98)00000000-0000ffff, ->(0,0), R, W, CPU disable 0, Lock 0, Non
posted 0
MMIO(a0)01c00000-1100ffff, ->(0,1), , , CPU disable 0, Lock 0, Non
posted 1
MMIO(a8)75000000-0000ffff, ->(2,0), , , CPU disable 0, Lock 0, Non
posted 0
MMIO(b0)51040000-0000ffff, ->(0,0), , , CPU disable 1, Lock 0, Non
posted 0
MMIO(b8)00000000-0000ffff, ->(0,0), , , CPU disable 0, Lock 0, Non
posted 0
PCIIO(c0)00001010-00003110, ->(0,1), , ,VGA 0 ISA 0
PCIIO(c8)00000750-00000000, ->(2,0), , ,VGA 0 ISA 1
PCIIO(d0)00002510-00000000, ->(0,0), , ,VGA 1 ISA 0
PCIIO(d8)00000000-00000000, ->(0,0), , ,VGA 0 ISA 0
CONFIG(e0)00000000-00000000 ->(0,0), CE 0
CONFIG(e4)00000000-00000000 ->(0,0), CE 0
CONFIG(e8)00000000-00000000 ->(0,0), CE 0
CONFIG(ec)00000000-00000000 ->(0,0), CE 0
Either the DRAM output is wrong or there is a real problem with our
DRAM programming.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@941 f3766cd6-281f-0410-b1cd-43a5c92072e9
at any given moment. The code is generic enough to handle this in a
processor-specific way behind the scenes if needed.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@933 f3766cd6-281f-0410-b1cd-43a5c92072e9
have a CAR area outside the usual RAM area. For those processors, we
have to implement a stack copying and switching mechanism. Since gcc
can't be told that the stack just moved, split stage1_main() into
stage1_phase1() and stage1_phase2() and stage1_phase3().
stage1_phase1() is the new entry point in stage1 and will handle
everything up to the point where we want to disable CAR.
Switching the stack, disabling CAR and handling other tasks related to
the stack switch (printk buffer move) is all wrapped in the
stage1_phase2() function.
stage1_phase2() calls disable_car() which then calls stage1_phase3().
stage1_phase3() is the former second half of stage1_main().
Notes about this patch:
- Code flow is almost unchanged for Qemu, K8 and Geode. No extensive new
testing required.
- We can support stack-keeping and stack-relocating architectures at the
same time, so C7 is definitely supportable
- The comment in stage1_phase2 says "some of this is not yet done". That
refers to the nonexisting code for stack switching on C7.
- "Minimal changes, maximum benefit".
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@932 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnch@gmail.com>
Acked-by: Ronald G. Minnich <rminnch@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@880 f3766cd6-281f-0410-b1cd-43a5c92072e9
moved to stage1 ROM code. Make the struct for nodeid/coreid generic to
x86. Create the functions for existing architectures are a model for
future architectures (VIA coming soon we hope).
Move includes so that things build correctly now.
This is actually a small patch that impacted a number of files due to
include order changes. This is build and boot tested on simnow and
build tested on geode.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@872 f3766cd6-281f-0410-b1cd-43a5c92072e9
AMP TinyGX still builds, this won't affect other platforms.
clean up 8111 stage1 code; add function to smbus,
memreset_setup_amd8111, for the 8111 specific parts of memreset.
include k8 .h to reduce warnings. Turn some things into functions (romcc
legacy cleanup) and put them in .c files.
simnow actually successfully gets through a reset cycle now.
Next is to fix the fidvid code.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@868 f3766cd6-281f-0410-b1cd-43a5c92072e9
This code has been tested on dbe62, and builds for qemu as well.
the next step is testing on simnow.
k8.h: add more prototypes and some required inline functions.
cpu.h: same
serengeti: expand defines in mainboard.h, though we need a better
mechanism; continue to fix initram.c, add new support files to Makefile
lib/console.c: include globalvars.h
lib/lar.c: Provide more informative print as the lar is scanned.
k8 north: needed reset_test.c from v2, fixes to raminit.c
arch/x86
Kconfig: new CONFIG variable CBMEMK, meaning coreboot mem k, memory
used for coreboot.
init_cpus.c: functions to start up CPUs
stage1_mtrr.c: bring over early mtrr support from v2.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@847 f3766cd6-281f-0410-b1cd-43a5c92072e9
what you get are warnings.
There is lots of room for improvement as we move to all CAR
code, but that will take time.
I hope to get this to really compile over the weekend.
At the same time, if anybody wants to take a crack at it, your efforts
are welcome.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@843 f3766cd6-281f-0410-b1cd-43a5c92072e9
We need the sys_info struct in the global variables struct for
cache as ram on k8. The sys_info struct is generally very useful
so it makes sense to start accomodating it.
This patch adds an (empty for now) sys_info struct for geode.
It add sys_info to the global variables struct.
It removes global variables from console.h to a new file,
globalvars.h. Very little code needs to include this file.
This patch is tested on the dbe62 and simnow with no problems.
k8 compilation is now broken but I'm working on it. I'm going through
the eyeballs-bleed code on k8 startup to document it and with any luck
we'll have more functionality by the end of today. But it's hard ...
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@828 f3766cd6-281f-0410-b1cd-43a5c92072e9
This means that basic resource maps are working, initial hypertransport
setup is working, the amd8111 ISA device is working, config space is
working for all the parts, we can grow the FLASH part address space to
more than 64k, and in general we're having a good time.
Here is the output:
coreboot-3.0.824 Tue Aug 26 22:18:21 PDT 2008 starting...
(console_loglevel=8)
Choosing fallback boot.
LAR: Attempting to open 'fallback/initram/segment0'.
LAR: Start 0xfff80000 len 0x80000
LAR: normal/option_table@0xfff80000, size 1776
LAR: normal/initram/segment0@0xfff80740, size 24404
LAR: normal/stage2/segment0@0xfff866f0, size 1
LAR: normal/stage2/segment1@0xfff86750, size 18542
LAR: normal/stage2/segment2@0xfff8b010, size 559
LAR: normal/payload/segment0@0xfff8b290, size 18142
LAR: bootblock@0xffff7fc0, size 32768
LAR: File not found!
LAR: Run file fallback/initram/segment0 failed: No such file.
Fallback failed. Try normal boot
LAR: Attempting to open 'normal/initram/segment0'.
LAR: Start 0xfff80000 len 0x80000
LAR: normal/option_table@0xfff80000, size 1776
LAR: normal/initram/segment0@0xfff80740, size 24404
LAR: CHECK normal/initram/segment0 @ 0xfff80740
start 0xfff80790 len 24404 reallen 24404 compression 0 entry 0x00000004
loadaddress 0x00000000
Entry point is 0xfff80794
Hi there from stage1
stage1 returns
run_file returns with 0
Goal for tomorrow is to get initram done.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@826 f3766cd6-281f-0410-b1cd-43a5c92072e9
Geode still builds fine.
include/lib.h includes a new function, cycles(), which is a u64 and
architecture-defined. (Thanks, Plan 9, for a sensible idea).
All rdtsc removed in favor of cycles()
All other changes are k8 specific. None of these changes adversely
impact existing platforms AFAICT.
Goal is that by 31/8/8, we're testing on simnow.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@807 f3766cd6-281f-0410-b1cd-43a5c92072e9
Continue to upgrade northbridge for k8.
Add a new standard include (which is optional on some chipsets),
mainboard.h, which will define important mainboard constants that
1. do not belong in dts
2. do not belong in Kconfig
3. are so tightly tied down to the mainboard they should probably not be
visible, i.e. the value of the variable is defined by artwork on the
mainboard, such as the socket type.
This file resolves the long-standing question of where certain
mainboard-dependent, compile-time control variables belong.
We've not resolved this issue in two years so here's how
we're going to do it. The first use of this is in the definition of
CPU_SOCKET_TYPE, needed by the northbridge code.
These changes do not affect existing Geode builds (tested on DBE62).
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@792 f3766cd6-281f-0410-b1cd-43a5c92072e9
It's all REV_F now and we're wasting time pretending otherwise. This
change simplifies the code and will continue to simplify the code.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@788 f3766cd6-281f-0410-b1cd-43a5c92072e9
Added a stepping enum to k8.h. This will allow us to do things like this:
if (cpu_stepping(node) < E0)
and so on instead of is_cpu_pre_e0_in_bsp or whatever it is.
Added and fixed Kconfig variables.
Broke out northbridge by function, so we can see what goes with what.
This tree still builds a working DBE62 coreboot that boots a kernel; no harm done to existing ports.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@781 f3766cd6-281f-0410-b1cd-43a5c92072e9
not that readable anyway, so kill them and use standard definitions
instead.
Introduce EXPORT_SYMBOL for shared symbols. EXPORT_SYMBOL tells the
compiler to use the standard calling conventions for a given symbol and
not to optimize it away.
Benefits:
- We can later use gcc -combine -fwhole-program without problems.
- It's a correctness fix for some optimizations.
- We could check for duplicated exported functions at link time.
- We could check whether exported functions are linked into initram or
stage2 by accident.
- We could generate usage statistics and possibly optimize away unused
shared functions.
- Through the above points, significant side reductions of 10-40%
Build and boot tested on qemu.
Build tested on all targets.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@780 f3766cd6-281f-0410-b1cd-43a5c92072e9
printk buffer management to it.
Build tested and boot tested and result tested on Qemu.
Adding a new global variable is not as easy as it looks, but the
comments in the code should be good enough to tell you how.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@760 f3766cd6-281f-0410-b1cd-43a5c92072e9
The option code is tricky as it is used by standalone code. If you
include that file and you are standalone, you now have to define
STANDALONE (is there a better way?)
Change the cpuid to be a 24-byte string instead of 3 u32s.
Make the CPUID usage PIC-safe by not using %ebx.
Test building on two different geodes, tested to boot on dbe62
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@750 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@745 f3766cd6-281f-0410-b1cd-43a5c92072e9
This includes using consistent (C) lines, adding email addresses,
and so on. The file southbridge/nvidia/mcp55/dts was never edited
by Yinghai Lu (thus removing his (C) line) and would be too trivial
anyway...
The changes (though trivial) were also informally acked by Ron on IRC.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@744 f3766cd6-281f-0410-b1cd-43a5c92072e9
(1)we now compile in all printks, which is good: we can print any message provided we can change
the console log level at any time.
(2) The console log level is compiled in and unchangeable, which is bad, as it defeats the purpose of (1).
Add a BIOS_ALWAYS log level. Make console log level a variable. Make functions that set it and get it
visible everywhere. Always print out the version message; this is really *not* noise!
PCI: Simplify pci functions so that they can be used in stage1 or anywhere for that matter. Add
a find function which is needed for many stage1 functions. Note that we copy but also clean up
the libpayload stuff just a bit.
Get rid of config space type 2. If there was ever a platform that used it, I don't know what it was,
and the presence is a needless distraction.
tested and working on DBE62 (which means the console and the pci functions work :-).
There is a remaining problem with dumplxmsrs which nobody understands. It prints out garbage if we use the
%s for the msr names.
Formatting is an issue; if somebody wants to fix formatting they can assume I will ack it. Sorry,
my emacs has gone just nuts.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@729 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@722 f3766cd6-281f-0410-b1cd-43a5c92072e9
Resource map and a way to use the pci config stuff from stage 1, done in
a way that will work in stage 2 (but only for systems that use type 1
config cycles; will fail for type MEM config cycles).
We need to rethink the PCI config stuff per Stepan's comment, in part
because the device tree now includes things that are NOT PCI devices.
Stepan's suggestion, to make the functions take busdevfn as the
parameter, makes a lot of sense.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.s
git-svn-id: svn://coreboot.org/repository/coreboot-v3@720 f3766cd6-281f-0410-b1cd-43a5c92072e9
it working, then we'll get it pretty.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@717 f3766cd6-281f-0410-b1cd-43a5c92072e9
This is not nearly complete, but just the current state of my tree.
k8/raminit.c does not compile at all. Lots of fixes are still needed to bring
it working into v3. I've gone through about 1/8 of the file, it errors out on
line 576 now.
The mcp55 files are in a very early state and also do not compile for me, so
I've disabled them by commenting out the select in mainboard/gigabyte/Kconfig.
Once northbridge/amd/k8/raminit.c builds, k8_ops needs to be added, then we
may actually see the first v3 k8 build. :)
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@713 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@706 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@702 f3766cd6-281f-0410-b1cd-43a5c92072e9
parameter to two functions.
2. geodelx.h: define DRAM_TERMINATED and DRAM_UNTERMINATED constants
3. dbe62/initram.c: move to auto PLL control, so set MANUALCONF to 0
4. all other initram.c: set up calls to cpu_reg_init with proper
TERMINATED/UNTERMINATED constants.
builds for dbe62. The auto PLL strapping is tested and works.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@699 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@698 f3766cd6-281f-0410-b1cd-43a5c92072e9
Note: You MUST have the later AMD VSA code that does not call bios
interrupts. If you use the older code, your boot will hang at this
point:
buf[0x20] signature is b0:10:e6:80
Call real_mode_switch_call_vsm
With post code 10
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@616 f3766cd6-281f-0410-b1cd-43a5c92072e9
before they can be #included. That is completely counter-intuitive. Add
necessary #includes to the header files themselves.
Fix a few cases where nonexisting files were #included.
Compile tested on Qemu and Alix1C.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@611 f3766cd6-281f-0410-b1cd-43a5c92072e9
