Why? Because the board doesn't use ide support. So you can't compile that in, it's not in the dts.
the mainboard Makefile picks the southbridge .c's to use.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1009 f3766cd6-281f-0410-b1cd-43a5c92072e9
and keep getting called away ... waiting for 1024 procs takes patience!)
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1008 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1007 f3766cd6-281f-0410-b1cd-43a5c92072e9
Also upper-cases the hex in lpc_serirq_polarity as all other Geode boards have it as such,
and remove parts of the commented out reference v2 setup block that should be handled by
this change now.
The USB power handling setting is meant to get the second pair of USB ports to be powered
on, as this changed done by Ron to DBE62 fixed DBE62's third and fourth USB port to be usable.
Oddly the USB power handling setting also makes memtest work, while without it memtest gets
unexpected interrupt halts right after it loads up.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1006 f3766cd6-281f-0410-b1cd-43a5c92072e9
Changes the interrupt router location to what all other Geode board ports are using, and
doesn't exclusively devote any IRQs for PCI usage, as no other Geode board does so.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1005 f3766cd6-281f-0410-b1cd-43a5c92072e9
This fixes one of the errors from using bison-2.4, but there are more.
This one in details is the following error:
BISON build/util/dtc/dtc-parser.tab.c
HOSTCC build/util/dtc/dtc-parser.tab.o
/home/leio/dev/coreboot-v3/util/dtc/dtc-parser.y: In function ‘yyuserAction’:
/home/leio/dev/coreboot-v3/util/dtc/dtc-parser.y:154: error: expected ‘;’ before ‘}’ token
make: *** [/home/leio/dev/coreboot-v3/build/util/dtc/dtc-parser.tab.o] Error 1
Note that 2.4.1 might be made to still work without the semi-colon for some languages, but I
understand 2.5 then still won't work without one. As it builds fine with this change with
bison-2.3, it should be safe to just add the semicolon.
The remaining error is the following:
/home/leio/dev/coreboot-v3/util/dtc/dtc-lexer.l: In function ‘yylex’:
/home/leio/dev/coreboot-v3/util/dtc/dtc-lexer.l:73: error: ‘yylval’ undeclared (first use in this function)
/home/leio/dev/coreboot-v3/util/dtc/dtc-lexer.l:73: error: (Each undeclared identifier is reported only once
/home/leio/dev/coreboot-v3/util/dtc/dtc-lexer.l:73: error: for each function it appears in.)
dtc-parser.tab.h doesn't seem to get an "extern YYSTYPE yylval" declaration, which per documentation should
only happen for pure parser cases ("%define api.pure"), but I can't find any such declaration in dtc to cause
the problem.
Note that upstream dtc builds fine with bison-2.4
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1004 f3766cd6-281f-0410-b1cd-43a5c92072e9
cpu setup is nonexistent. No car either. Work remains ...
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1000 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@999 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@998 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@997 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@996 f3766cd6-281f-0410-b1cd-43a5c92072e9
much of this builds.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@995 f3766cd6-281f-0410-b1cd-43a5c92072e9
This actually starts to get compile errors, instead of config errors.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@994 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@993 f3766cd6-281f-0410-b1cd-43a5c92072e9
Lots of wrong stuff here, but a lot of stuff is right. I am looking for
all the help I can get.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@992 f3766cd6-281f-0410-b1cd-43a5c92072e9
This is from v2. Once again, the pattern:
- save the chip name for the common enable parts, hence i82801gx.c
- remove the leading i82801_ from most other bits, since we compile
in different directories now
- Every device of a type has a distinct .c file (e.g. pcie.c)
- Each device of a type may be realized in more than one bit of silicon,
and have more than one set of operations, although code is common.
These are placed into distinct operations structs (see pcie.c)
- for every distinct device, there is a .dts file.
This set of rules makes for simple cross-part standardization of code.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@991 f3766cd6-281f-0410-b1cd-43a5c92072e9
sync as much as possible so the latest patches apply.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@990 f3766cd6-281f-0410-b1cd-43a5c92072e9
Fix the issue. OBJ->SRC conversions are a bit tricky to get right.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@989 f3766cd6-281f-0410-b1cd-43a5c92072e9
obvious that they are needed, so a comment to that effect will hopefully
prevent accidental "cleanups" in the future when nobody remembers the
history of that makefile rule anymore.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@988 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Marc Jones <marcj303@yahoo.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@986 f3766cd6-281f-0410-b1cd-43a5c92072e9
Modify chipset_flash_setup to support enabling NAND flash on other locations
than CS0, by making enable_ide_nand_flash have a non-boolean meaning where zero
means no NAND (IDE), and 1 through 4 gives the one-based chip select array
location (so 1 means CS0, 2 means CS1, 3 means CS2 and 4 means CS3, as chip
select notation is zero-based).
This loses the code for supporting more than one NAND chip select or different
ones than FLASH_MEM_4K, but these couldn't be supported before anyway, because
that is board specific, but the supporting structure was a static const struct
in generic southbridge specific code.
This support should be instead implemented via the device tree dts files.
Enables NAND on ArtecGroup DBE61 and DBE62 on CS1, as that's where it is.
The end result is that these mainboards can now boot off of NAND with FILO
without local modifications to the previously existing southbridge specific
static const struct that had no chance of being upstreamed as it would break
all other CS5536 NAND boards that have it on CS0.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@985 f3766cd6-281f-0410-b1cd-43a5c92072e9
table get rebuilt unconditionally due to slightly incorrect
dependencies.
That's wasteful and may hide other dependency bugs.
Fix the lar, lzma, nrv2b and option table dependencies.
This trims down recompilation time a lot. The only remaining stuff being
rebuilt is:
~/corebootv3-better_dependencies> make
CP build/config.h
GEN build/build.h
LAR build/coreboot.rom
PAYLOAD none (as specified by user)
CP build/bios.bin
DONE
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@984 f3766cd6-281f-0410-b1cd-43a5c92072e9
The largest changes are to get_pci_bridge_ops, and related changes to make it
compile and use correct declarations.
While I was doing that I moved the checks for CONFIG_<BUS>_PLUGIN_SUPPORT to
the Makefile.
The only functional difference is a possible NULL dereference in a debug
statement.
I also added a few more consts, now that my other patch is in.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@983 f3766cd6-281f-0410-b1cd-43a5c92072e9
It also changes %p debug statements in various places. I think they get in
the way of diffs when you have log files to compare. I don't want to see the
allocation differences most of the time. I turned most of them into NULL
checks. If they were supposed to be "Where are we in device allocation?"
checks, we could make them into that too.
It's a work-in-progress. Comments welcome.
I think most of the changes are self explanatory, but this one might not be:
If you are reading all the BARs from a device, and you come to a 64-bit BAR.
No matter why you skip it, you should skip it as a 64-bit BAR, and not try to
read the upper half as the next 32-bit BAR.
Because of that, set the 64-bit flag IORESOURCE_PCI64 early, and don't clear
it on return.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@980 f3766cd6-281f-0410-b1cd-43a5c92072e9
workarounds are better than instant reboots, mangle the code so that it
only switches stacks and flushes the cache.
There are two genuine fix in there as well:
We have to switch %esp before CAR is disabled. That way, the stack is
always valid.
And one of the nastier bugs easily happening in C: We had a pointer to a
const struct, but we wanted a const pointer to a struct. This kills the
(correct) warning about that code.
Many thanks to Corey for testing countless iterations of that code.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested and
Acked-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@978 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@976 f3766cd6-281f-0410-b1cd-43a5c92072e9
Make cmos.layout work with incomprehensible tool -- just turn off checksums.
Add static.c to list of files covered by kscope
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@975 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@974 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@973 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@972 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@971 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmai.com>
Acked-by: Ronald G. Minnich <rminnich@gmai.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@970 f3766cd6-281f-0410-b1cd-43a5c92072e9
mainboard.h -- we need a better way to do this. We should not have to specify address bits in
this way. But it is not as easy a problem as it seems.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@969 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@968 f3766cd6-281f-0410-b1cd-43a5c92072e9
Does not yet build
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@967 f3766cd6-281f-0410-b1cd-43a5c92072e9
alue. There
is a known bug in v2/v3 wherein a BAR that is set is ignored. This change will c
ome in very
slowly as it is a bit tricky to get right as we redesign the dev code.
Also make the vm86 stuff use the SRC instead of OBJ names so we can see it in ks
cope.
Finally, beginnings of documentation changes, not finished yet.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@965 f3766cd6-281f-0410-b1cd-43a5c92072e9
1. moves the run_bios function down so it can call setup_realmode_idt
2. adds the __attribute__((regnum(0))) to biosint because it is called from assembly
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@964 f3766cd6-281f-0410-b1cd-43a5c92072e9
dev_phase4 will call compute_allocate. This is an early pass at
making the device tree code a little more readable. We have done a
pass on the stage2 code and are comfortable with phases 1-3 and 5-6;
phase 4 is the phase that is really tough to follow. We are working
on cleaning that up today.
This change tested and working on dbe62.
We are well aware that as more complex targets appear this code
may break on them. At the same time, we are determined to untangle the
thicket of code in phase 4, since this code has been a source of
confusion for several years now.
There used to be a recursion: compute_allocate_resource would ALWAYS
call read_resources, which would in turn call compute_allocate_resource.
We are attempting to resolve this in a clearer manner.
boots to linux on dbe62
boots to etherboot on qemu
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@963 f3766cd6-281f-0410-b1cd-43a5c92072e9
Most substantive change is getting rid of 'initialized', which was only
ever needed in v2 due to an implementation mistake.
With Uwe's comments taken into account,
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@961 f3766cd6-281f-0410-b1cd-43a5c92072e9
cleans up the NULL pointer protection.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@960 f3766cd6-281f-0410-b1cd-43a5c92072e9
