file-by-file changes:
dts:
There are no bus devices, remove it. Add the northbridge devices.
Fix susbsytem_vendor and subsystem_device.
southbridge/intel/i82371eb/ide:
Make the ide enabled by default.
northbridge/intel/i440bxemulation/i440bx.c:
1. Split ops into domain and northbridge
A. Domain should have bus ops, scan_bus, etc.
B. Northbridge should have ops for its own registers.
In this case it only needs read and set resources.
functions:
i440bx_read_resources - set up the IO and VGA resources. VGA is fixed.
i440bx_ram_resources - this should be called after resource assignment.
i440bx_set_resources - call pci_set_resources then i440bx_ram_resources.
i440bx_domain_read_resources - Set up system-wide resources, and
reserve space for the local APIC. I put the IOAPIC here too,
but it belongs somewhere in the southbridge.
i440bx_domain_set_resources - Mark the domain-specific resources as
stored (In a real device you'd probably need to set some
registers here.) Call phase4_set_resources for children.
southbridge/intel/i82371eb/i82371eb.c:
1. Add ISA read and set resources to reserve legacy IO space.
- Note that since it's subtractively decoded, it doesn't need
to be stored anywhere. It needs to be marked stored so
pci_set_resource doesn't try to store it.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@1092 f3766cd6-281f-0410-b1cd-43a5c92072e9
Fix the bus location for Qemu IDE.
This patch only provides the needed infrastructure for per-device
subsystem IDs, it does not hook them up to the PCI core yet, so this
patch is a no-op.
By the way, the on_mainboard property is activating lots of completely
untested code paths in v3, so someone might want to audit them.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@844 f3766cd6-281f-0410-b1cd-43a5c92072e9
is the logical continuation of r416 which happened a year ago.
As an added bonus, we now have consistent naming again, making grepping
the source for dts properties possible.
Build tested on all targets. Patch attached for Gmail users.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@697 f3766cd6-281f-0410-b1cd-43a5c92072e9
mainboard-name naming has been postponed because it's not clear what the
real name should be.
Generated code is identical to the state before the patch.
Compile tested.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@694 f3766cd6-281f-0410-b1cd-43a5c92072e9
Compile tested including boundary cases.
Runtime tested on dbe62 by Ron. Works fine.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@693 f3766cd6-281f-0410-b1cd-43a5c92072e9
code boots and works on qemu and
alix1c. It represents a huge change and a huge improvement. There are a
few fixes left to do, which
will come once this is in.
This change started out easy: get the device IDs OUT of the the dts, and
into one place. We
decided the device IDs should be in the constructors ONLY. To make a
long story short, that just did
not work out, and it revealed a flaw in the design. The result?
- no more ids in the various dts files.
- the constructor struct is gone -- one less struct, nobody liked the
name anyway
- the device_operations struct now includes the device id.
- constructor property no longer used; use device_operations instead.
- lpc replaced with ioport
All the changes below stem from this "simple" change.
I am finding this new structure much easier to work with. I hope we're
done
on this for real, however!
TODO:
1. Change limitation in dtc that makes it hard to use hex in pci@
notation.
Now for the bad news. Sometime today, interrupts or io or something
stopped working between r596 and r602 -- but I did no commits at
that point. So something has gone wrong, but I don't think it's this
stuff.
I did try a build of HEAD, and it fails really, really badly. Much
more badly than this fails, so I think this commit is only going
to improve things. It does work fine on qemu, fails on alix1c,
so I suspect one of today's "clean up commits" broke something.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@603 f3766cd6-281f-0410-b1cd-43a5c92072e9
in dts. This gets rid of the ugly pcipath etc. properties.
So, instead of
somedevice {pcipath="1,0";};
We say pci@1,0{ etc. etc. };
As per my agreement I agree to document this in the design doc.
The alix1c compiles but is untested, and will probably need some work.
I will do these additional tasks on friday.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
M include/device/path.h
Add LPC path type, replacing SUPERIO path type, since SUPERIO is only
one type of LPC. Clean up tabbing in parts of the file (cosmetic).
M mainboard/emulation/qemu-x86/dts
Modify this dts for the new path naming scheme.
M device/pci_device.c
Change what used to be a BIOS_ERR (but is no longer) to a BIOS_NOTICE.
The change is that the device tree includes more than just PCI devices,
so finding a non-PCI device is no longer fatal; a notice is useful.
M device/device_util.c
Add string creation for PCI_BUS nad LPC.
M northbridge/intel/i440bxemulation/dts
Add ID info for the chip.
M northbridge/intel/i440bxemulation/i440bx.c
Change initialization so it is explicitly for the .ops struct member.
M util/dtc/flattree.c
Add support for the new path naming scheme.
I'm in the middle of this commit so I'll fix the hard-coded lengths
next commit.
Also delete dead code between #if 0 and /* and //
M util/x86emu/vm86.c
comment out unused variables. these may someday be use, not ready
to delete them yet.
M Makefile
Change -O2 to -g. We need debugging on LAR far more than we need performance.
git-svn-id: svn://coreboot.org/repository/coreboot-v3@593 f3766cd6-281f-0410-b1cd-43a5c92072e9
- I left LB_TAG_ intact because they are used by the payloads
- file renames are still missing. see next commit
- some lb_ renames might be missing. feel free to provide patches.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@564 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@416 f3766cd6-281f-0410-b1cd-43a5c92072e9
Acked-by: Stefan Reinauer <stepan@coresystems.de
This patch adds artec dbe61 support, removes all mainboard.c, and
adds
the code to dtc so that it takes these properties from the top level
dts:
/{
.
.
.
mainboard-vendor = "AMD";
mainboard-part-number = "Norwich";
}
statictree.h will have:
extern const char *mainboard_vendor, *mainboard_part_number;
and statictree.c will have:
const char *mainboard_vendor = "AMD";
const char *mainboard_part_number = "Norwich";
It is an error to NOT have the vendor and part number in the top
level dts.
thanks
ron
Get rid of mainboard.c in all mainboard directories.
Modify dtc so that it creates declarations (in statictree.h) and
generates the char *
for mainboard name and part # (in statictree.c).
Failure to set up a mainboard-vendor
OR mainboard-part-number property in the mainboard dts will get a
helpful and descriptive error message (tested).
This may be a first for the linuxbios config
tools.
Add Georgi's patch for the bug in flattree.c; assign *cp = 0.
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@394 f3766cd6-281f-0410-b1cd-43a5c92072e9
NOTE: We're going to need to change the arch/x86 to have, e.g.,
arch/x86/geodelx. But we need to get lined up with the tree first.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@381 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@370 f3766cd6-281f-0410-b1cd-43a5c92072e9
southbridge drivers in Kconfig.
* It includes initial superio code as well, but there is at least one
error in the pnp_device.c/superio scenario left
* Fixed biosemu.c, vm86.c, pnp_device.c (sort of)
* Enable vm86 instead of x86emu per default for vga init for now. This
makes VGA in qemu work. There might be a bug in x86emu or the compiler
I am using. (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux))
* Import isa-dma.c, keyboard.c and i8259.c from v2 /pc80, which was taken
from LinuxBIOSv1 released from LANL under release LA-CC Number 00-34
and using parts from the Linux kernel.
This patch makes vga and keyboard work in qemu. Yippie
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@260 f3766cd6-281f-0410-b1cd-43a5c92072e9
This tree shows the new model. It demonstrates the constructor array
in use, for devices that are and are not specified in the dts. It
introduces a new generic structure, device_id, analogous to
device_path, which can describe all the types of device IDs we have.
It shows a way to set up arrays of structs, in the dts, for the
constructors, so we avoid ldscript hacks.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@233 f3766cd6-281f-0410-b1cd-43a5c92072e9
Comitting IP checksum code, and its usage in linuxbios table creation.
Mods to the dts, so that the device ops for the domain are set to the
proper structure. This change is important. It gets rid of the obscure,
confusing use of the enable_dev function to pick the right ops for a
device. It makes the ops initilization very clear at the top level, in
the dts. This has been tested and works, linux boots on Bochs under
this version.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@191 f3766cd6-281f-0410-b1cd-43a5c92072e9
add debug printks.
make dtc put 'root' as the first_node, instead of making the last node
be the first node .... much happier in linuxbios.
sprintf is broken ... dammit. I hope someone will fix it. I've got about
another week of full-time I can spend on this and then I go back to part
time. So I'm going to need some help soon.
other fixups, and also, make the dts conform to the needs of the device
tree. So we have a domain0 and a device (0,0) that is the north.
Mostly things are working, but we're STILL not getting any memory in the
LB tables from the north. The device tree is a bitch.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@175 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@172 f3766cd6-281f-0410-b1cd-43a5c92072e9
Phase 1: done
Phase 2: early setup ...
Phase 2: done
Phase 3: Enumerating buses...
qemu-x86 enable_dev done
dev_phase3_scan: scanning Root Device
scan_static_bus for root(Root Device)
cpus: Unknown device path type: 0
cpus() enabled
i440bxemulation_enable_dev:
i440bxemulation_enable_dev: DONE
northbridge_intel_i440bxemulation() enabled
northbridge_intel_i440bxemulation() scanning...
dev_phase3_scan: scanning
pci_scan_bus start
PCI: pci_scan_bus for bus 00
PCI: scan devfn 0x0 to 0xff
PCI: devfn 0x0
PCI: pci_scan_bus pci_scan_get_dev returns dev <NULL>
Change dts compiler to emit a new struct member, dtsname, for devices,
so we can get actual useful names for things.
Several mods and printks added.
printk(BIOS_SPEW
gives no output for reasons I don't understand.
Next in line is bringing back v2 support for pci, but not doing it the
way v2 does it.
note the cpus() printk above. cpus don't have a valid path yet.
We still need to work out the dts syntax for systems with multiple links
(opteron)
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@163 f3766cd6-281f-0410-b1cd-43a5c92072e9
Plus some small trivial reformatting of comments in stage0_i586.S
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@146 f3766cd6-281f-0410-b1cd-43a5c92072e9
2007-02-27 17:13:40 +00:00
Renamed from mainboard/emulation/qemu-i386/dts (Browse further)
