Migrate google/rikku (Acer Chromebox CXI2) from Chromium tree to
upstream, using google/guado as a baseline.
original source:
branch firmware-rikku-6301.110.B
commit 2e71207 [CHERRY-PICK: broadwell: Update to microcode 0x1F]
TEST=built and booted Linux on rikku with full functionality
blobs required for working image:
VGA BIOS (vgabios.bin)
firmware descriptor (ifd.bin)
Intel ME firmware (me.bin)
MRC (mrc.bin)
external reference code (refcode.elf)
Change-Id: Iba618a0b2cf2d613f6429b3e7606e0b47fa97a4d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/12802
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/353174
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Set up the pins and initialize the driver.
BRANCH=none
BUG=chrome-os-partner:50645, chrome-os-partner:51537
TEST=with the rest of the patches applied it is possible to
communicate with the cr50.
Change-Id: I0ccd8777288e35870658268813c9202dd850c70d
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/349852
Reviewed-by: Douglas Anderson <dianders@chromium.org>
This register is described in the TRM in section called
GRF_GPIO3D_IOMUX. Added definitions allow to configure the SPI0
interface.
BRANCH=none
BUG=chrome-os-partner:50645, chrome-os-partner:51537
TEST=with the rest of the patches applied it is possible to
communicate over SPI0
Change-Id: Iea92971b0520dc4549cd0fd263dcb2098f80f6d6
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/349851
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Until now it was assumed that all TPM devices were of the same type
(TCG 1.2 spec compliant) and x86 based boards had LPC connected TPMs
and all other boards had I2C connected TPMs.
With the advent of TPM2 specification there is a need to be able to
configure different combinations of TPM types (TPM or TPM2) and
interfaces (LPC, I2C and SPI).
This patch allows to do it. Picking Chrome OS still assumes that the
board has a TPM device, but adding MAINBOARD_HAS_TPM2 to the board's
Kconfig will trigger including of TPM2 instead.
MAINBOARD_HAS_LPC_TPM forces the interface to be set to LPC, adding
SPI_TPM to the board config switches interface choice to SPI, and if
neither of the two is defined, the interface is assumed to be I2C.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that none of the generated board configurations change
as a result of this patch. With the rest of the stack in place it
is possible to configure different combinations of TPM types and
interfaces for ARM and x86 boards.
Change-Id: I659e9301a4a4fe065ca6537ef1fa824a08d36321
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/349850
Reviewed-by: Martin Roth <martinroth@chromium.org>
CBMEM console stores all the console logs in CBMEM. Address of this
location in CBMEM where console logs are stored needs to be passed up to
OS using GNVS.
1. Add CBMC to GNVS fields in globalnvs.asl
2. Add cbmc member to global_nvs_t structure in nvs.h
3. Initialize gnvs->cbmc to address of cbmem console
BUG=chrome-os-partner:54342
Change-Id: Idcd4573e626fa433c1623bdcbe29921de64539b2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15177
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/353023
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Add a bootblock which builds with C_ENVIRONMENT_BOOTBLOCK selected.
This is the first piece in supporting FSP 2.0. Move esraminit from
romstage into the bootblock. Replace cache_as_ram with
car_stage_entry.S and code in romstage.c
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
TEST=None
Change-Id: I14d2af2adb6e75d4bff1ebfb863196df04d07daf
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15132
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352036
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
If a bridge has the primary bus equal to the secondary bus the
busmaster_disable_on_bus() will infinitely call itself. Avoid the
inifinite recursion by checking current bus number against the
secondary bus number.
BUG=chrome-os-partner:54262
TEST=Ran on reef. Able to actually get the chipset to assert SLP_Sx
signals which means no more infinite recursion.
Change-Id: I52b21fbba24e6a652ea8f9f87f5f49f60109c8f2
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15157
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Original-Tested-by: build bot (Jenkins)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352034
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Like other boards there will likely be information needed from
GNVS in the SMM handler. Therefore, it's important that the point
is stashed accordingly.
BUG=chrome-os-partner:54275
TEST=Noted GNVS messages from SMM console on reef.
Change-Id: If12b69731330a1e0af7f8fe880635e5ffd02d715
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15152
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352033
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
It appears that PM1 is not wired up to the SMI status register, but
it does definitely cause SMIs to trigger. Therefore, provide a fake
PM1 status bit by checking the power button status when SMI status
is indicating no status as well as the PM1 control indicating that
SCI mode is not enabled.
BUG=chrome-os-partner:54262
TEST=Smashed power button on reef to cause SMI in firmware. No longer
loops infinitely with constant SMIs firing.
Change-Id: I9aa1b5f79b651cbc19a2d3353d9ef65429386889
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15155
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352031
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Provide the bit definitions for the SMI status register. Also,
utilize them which means deleting some of the handlers that can't
exist because there are no status bits.
BUG=chrome-os-partner:54262
Change-Id: I389c7cb3cad01ba0eca52a337ffee352a2010bfa
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15154
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Original-Tested-by: build bot (Jenkins)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352030
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
1. The checksum method that was documented is not correct. So, no use
filling in a value based on wrong calculations. This can be added back
once updated information is available.
2. Checksum does not seem to affect the booting up of SoC. So, fill in 0
for now.
BUG=None
BRANCH=None
TEST=None
Change-Id: I0e49ac8e0e04abb6d7c9be70323612bdef309975
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://review.coreboot.org/15145
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352028
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Update pack and header order and mark the entries as mandatory and
recommended w.r.t. ordering (mandatory = essential for booting,
recommended = okay to change, but this config is tested and known to work).
BUG=None
BRANCH=None
TEST=None
Change-Id: Ia089bdaa0703de830bb9553130caf91a3665d2c4
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://review.coreboot.org/15144
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352027
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Since the HTIF is a non-standard interface, and coreboot already has a
8250 driver, I started implementing an 8250 core for spike[1].
[1]: https://github.com/riscv/riscv-isa-sim/pull/53
BUG=None
BRANCH=None
TEST=None
Change-Id: I84adc1169474baa8cc5837358a8ad3d184cfa51b
Original-Signed-off-by: Jonathan Neuschfer <j.neuschaefer@gmx.net>
Original-Reviewed-on: https://review.coreboot.org/15150
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352026
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
In the default (medlow) code model, pointers are loaded with a lui, addi
instruction sequence:
lui a0, 0xNNNNN
addi a0, a0, 0xNNN
Since lui sign-extends bits 32-63 from bit 31 on RV64, lui/addi can't
load pointers just above 0x80000000, where RISC-V's RAM now lives.
The medany code model gets around this restriction by loading pointers
trough auipc and addi:
auipc a0, 0xNNNNN
addi a0, a0, 0xNNN
This way, any pointer within the current pc 2G can be loaded, which is
by far sufficient for coreboot.
BUG=None
BRANCH=None
TEST=None
Change-Id: I77350d9218a687284c1337d987765553cf915a22
Original-Signed-off-by: Jonathan Neuschfer <j.neuschaefer@gmx.net>
Original-Reviewed-on: https://review.coreboot.org/15148
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352025
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Due to USB LDO issue in current steppings, cold reboot needs to be
temporarily disabled. Thus, hard_reset call should be the same as
soft_reset.
Once future steppings are available INTEL_COMMON_RESET can be enabled again.
BUG=None
BRANCH=None
TEST=None
Change-Id: If0ec56db3864d500acc93d2b363a78a6cd7632da
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://review.coreboot.org/15143
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/352021
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Not all x86 architectures support the mm register set. The default
routine that saves BIST in mm0 and a "weak" routine that saves the TSC
value in mm2:mm1. Select the Kconfig value
BOOTBLOCK_SAVE_BIST_AND_TIMESTAMP to provide a replacement routine to
save the BIST and timestamp values.
TEST=Build and run on Amenia and Galileo Gen2.
BUG=None
BRANCH=None
TEST=None
Change-Id: I8119e74664ac3522c011767d424d441cd62545ce
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15126
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351787
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Use Kconfig values to enable debug spinloops in assembly_entry.S. This
makes it easy to debug the assembly code.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
TEST=None
Change-Id: Ic56bf2260b8e3181403623961874c9289f3ca945
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15135
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351785
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
FSP 2.0 spec has updated the signatures for the FSPM and FSPS blobs
with the 139_40 release. In order to successfully pass through
memory/silicon init the header files must be updated to the latest
versions
BUG=chrome-os-partner:52784
BRANCH=none
TEST=built and booted
BUG=None
BRANCH=None
TEST=None
Change-Id: Ib60d0d9afa4ee29dff26177826ba59db81b630e8
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15066
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: build bot (Jenkins)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351380
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Scan the boot block when building it with C_ENVIRONMENT_BOOTBLOCK
selected.
TEST=Build and run with Galileo Gen2
BUG=None
BRANCH=None
TEST=None
Change-Id: I922f761c31e95efde0975d8572c47084b91b2879
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15130
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351379
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add car_stage_entry as an optional routine in the checklist.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
TEST=None
Change-Id: I52f6aefc2566beac01373dbebf3a43d35032a0df
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15129
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351378
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Support ROM_SIZE greater than 16 MiB. Work around SMBIOS rom size
limitation of 16 MiB by specifying 16 MiB as the ROM size.
TEST=Build and run on neoncity
BUG=None
BRANCH=None
TEST=None
Change-Id: I3f464599cd8a1b6482db8b9deab03126c8b92128
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15108
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: build bot (Jenkins)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351377
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
EMMC TX DATA Control needs to be programmed to 0x1A1A to make amenia
system can run stable on EMMC with HS400 mode.
BUG=None
BRANCH=None
TEST=None
Change-Id: I42c23ff7e6956e75de5e1b1339a570b35d999301
Original-Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Original-Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15092
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351375
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Support the common Intel LPSS I2C driver for the 6 I2C bus controllers
that are present on the Skylake-LP PCH with a 120 mHz clock. The
required lpss_i2c_base_address() method is implemented separately for
verstage/romstage and ramstage environments.
This provides methods to convert to and from "struct device" and the
I2C controller bus number for that device. These are used to provide
support for the "I2C Bus Operations" that are present in the coreboot
devicetree.
To support the I2C controller before ramstage an early init function
is provided to do minimal initializaiton of the PCI device and assign
a temporary base address for use before memory. The final base
address is assigned during device enumeration and used during ramstage.
Because it is usually not necessary to enable I2C controllers before
ramstage a config register for the devicetree is provided to perform
early initialization of this controller. In addition the bus speed
can be set in the devicetree and that speed will be applied when the
device is initialized. If not provided the default speed is set to
I2C_SPEED_FAST.
This was tested with the google/chell mainboard by reading and writing
from the trackpad and codec devices during both verstage and ramstage.
BUG=None
BRANCH=None
TEST=None
Change-Id: Ia0270adfaf2843a3be4e00c732c85401a3401ef5
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15105
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: build bot (Jenkins)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351373
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Allow reg_script to be used during the bootblock.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
TEST=None
Change-Id: I55fe0be3f50116927b801ce67a3f23bb1931f6e7
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15131
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351372
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add asmlinkage to bootblock_main_with_timestamp so that it may be called
directly from the assembly code.
TEST=Build for Amenia and Galileo Gen2
BUG=None
BRANCH=None
TEST=None
Change-Id: Iefb8e5c1ddce2ec495b9272966b595d5adcebc1c
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15125
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351370
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Move the existing I2C voltage configuration variable into a new
structure that is equivalent, similar to how USB ports are configured.
This is to make room for additional I2C configuration options like
bus speed and whether to enable the bus in early boot which are coming
in a subsequent commit.
The affected mainboards are updated in this commit so it will build.
BUG=None
BRANCH=None
TEST=None
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id2dea3df93e49000d60ddc66eb35d06cca6dd47e
Original-Reviewed-on: https://review.coreboot.org/15104
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351339
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add the voltage tolerance GPIO attribute for configuring I2C/I2S buses
that are at 1.8V. This is currently done by passing in a value to FSP
but it is needed earlier than FSP if the I2C bus is used in verstage.
This does not remove the need for the FSP input parameter, that is
still required so FSP doesn't disable what has been set in coreboot.
The mainboards that are affected are updated in this commit.
This was tested by exercising I2C transactions to the 1.8V codec while
in verstage on the google/chell mainboard.
BUG=None
BRANCH=None
TEST=None
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I93d22c2e3bc0617c87f03c37a8746e22a112cc9c
Original-Reviewed-on: https://review.coreboot.org/15103
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: build bot (Jenkins)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/351338
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
