from v2 to install them. Linux boots fine and all interrupts
seem to work correctly -- the network comes up, USB hot plug works,
I can mount the USB disk, etc.
To enable pirq tables for a given mainboard, simply add the
select PIRQ_TABLE (see below) to the Kconfig for that board.
Again, this code builds and boots linux on the alix1c.
I think, with this change, we are very close to moving ALL LX boards to
v3 and deprecating v2. The major remaining fix is to add an empty LAR
entry to fill empty space in LAR and speed up the LAR file search
process.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Index: include/tables.h
Add prototype, conditioned on CONFIG_PIRQ_TABLE
Index: util/x86emu/vm86.c
Comment out 'debug trap' code that scribbles vectors at 0x4000.
I don't know why this is here, but I'd like to leave it #if'ed out --
somebody, at some point, thought we needed it. To reenable, we will need
to move stage2 code or these magic vectors.
Index: arch/x86/Makefile
Add support for conditional compilation of pirq support code.
Index: arch/x86/pirq_routing.c
Add this file from v2.
Index: arch/x86/archtables.c
Add call to write_pirq_routing_table (controlled by #ifdef
CONFIG_PIRQ_TABLE)
Index: arch/x86/Kconfig
Add new config variable: PIRQ_TABLE
Index: device/device.c
Fix some trivial bugs.
Index: mainboard/pcengines/alix1c/Makefile
Add pirq table code for stage2
Index: mainboard/pcengines/alix1c/dts
Modify dts to properly set southbridge variables
Index: mainboard/pcengines/alix1c/irq_tables.c
Add code from v2 for the alix1c.
Index: mainboard/pcengines/Kconfig
Add 'select PIRQ_TABLE'
Index: include/arch/x86/pirq_routing.h
Add include file from v2.
Remove all the SLOTCOUNT nonsense. This hack was only needed
for a very early version of gcc 3.x, where they screwed up the
creation of struct members that used the [] syntax for variable-length
array at the end of the struct.
Index: include/device/pci.h
Add prototype
git-svn-id: svn://coreboot.org/repository/coreboot-v3@582 f3766cd6-281f-0410-b1cd-43a5c92072e9
to a board should add a defconfig in mainboard/vendor/board/defconfig.
I think that the defconfig should:
1. Use the ROM size that comes with the board
2. Enable compression
3. Not include a payload
This will make it easy for buildrom or anyone who wants to build it
manually to use lar to add their payloads. It also allows buildrom to
keep the configs in the coreboot tree.
The patch also adds mainboard/emulation/qemu-x86/defconfig
Signed-off-by: Myles Watson <myles@pel.cs.byu.edu>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@578 f3766cd6-281f-0410-b1cd-43a5c92072e9
Press <Enter> for default boot, or <Esc> for boot prompt...
boot: hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200
malloc_diag: alloc: 240 bytes (3 blocks), free: 16136 bytes (1 blocks)
malloc_diag: alloc: 256 bytes (4 blocks), free: 16120 bytes (1 blocks)
file_open: dev=hda1, path=/vmlinuz
ide_probe: ide_probe drive #0
ide_probe: ctrl 1188096 base 0
find_ide_controller: found PCI IDE controller 1022:209a prog_if=0x80
find_ide_controller: primary channel: compatibility mode
find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4
Sadly, it locks up at this point, but this is still progress.
I realize the location of the defines is a little odd, but I think it is useful to have
them right next to the function that uses them.
Index: southbridge/amd/cs5536/cs5536.c
cs5536.c: add ide support functions from v2
Index: mainboard/pcengines/alix1c/dts
Correct error in southbridge pcipath. Add enable_ide to dts.
Index: southbridge/amd/cs5536/dts
Add dts for enable_ide.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@575 f3766cd6-281f-0410-b1cd-43a5c92072e9
Due to some problems with PCI transactions, Geode LX needs the ROM cache properties to be write-serialize + cache disabled by runtime. More details below.
Add mainboard_pre_payload() call to each mainboard as the final coreboot function before the payload is called by stage1.
Note that this patch also grows the bootblock from 16K to 20K to make room for mainboard_pre_payload().
"The problem is a transaction depth issue and bottlenecks inside the GX
and LX that go across PCI. The conditions are very complicated but it
comes down to we need write serialization for writes to PCI. If you
look in the data book you can't have write serialization and the cache
enabled on a given area. During coreboot we don't have to worry about
a write or a PCI bus master so I think we can enable caching the ROM.
After coreboot we can't be sure what will happen in the system so we
need to set it up to be safe. For example flashrom just clears the
write protect bit. If the cache were enabled (no write serialization)
and flashrom was writing the ROM we would be in a precarious position.
A PCI bus master doing a read or a write that has a hit on a tag
would cause enough bottleneck conditions that it might hit the bug. We
could change flashrom but that doesn't help other tools. We need to
leave the system in a safe state. Also, caching the ROM after it is no
longer used doesn't make much sense. So, we need a call just before
the payload runs to clean up the system."
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@573 f3766cd6-281f-0410-b1cd-43a5c92072e9
released new-model VSA code.
Changes:
Index: util/dtc/flattree.c
Add an ID entry for apic properties.
Index: northbridge/amd/geodelx/apic
This is a new dts for the northbridge used as an APIC.
Index: northbridge/amd/geodelx/pci
This is a new dts for the northbridge used as a PCI device.
Index: northbridge/amd/geodelx/geodelx.c
Fix a non-obvious bug: we had set phase3 scan bus for both the
domain AND the PCI device, which is a mistake: can't scan from the
PCI device too.
Index: northbridge/amd/geodelx/domain
This is a new dts for the northbridge used as an pci domain.
Created via svn move dts domain
Index: device/pci_device.c
If there are leftover devices, it is now a warning, not an error,
since there are
some no-pci devices in the tree now. For future: only complain about
leftover PCI devices ...
Index: device/device.c
make devcnt a global and initialize it in init_dev. Add a debug printk.
Index: mainboard/pcengines/alix1c/dts
Add an 'apic' entry for the mainboard. This actually looks pretty clean
to me, the way it went in.
Index: northbridge/amd/geodelx/vsmsetup.c
Delete all pcibios int support, no longer needed for VSA.
Please note that this patch includes Carl-Daniel's improvements
below, which I have Ack-ed.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
A few minor comments. It would be great if you could address them before
committing.
northbridge/amd/geodelx/domain is a copy of northbridge/amd/geodelx/dts.
You probably want to use "svn mv" for that because it preserves history
and the old file was probably intended to have been moved, not copied.
northbridge/amd/geodelx/vsmsetup.c:247: warning: ‘biosint’ defined but
not used
Since the new VSA does not use BIOSINT services anymore, deleting
biosint and related functions from vsmsetup.c would shrink vsmsetup.c by
one fourth. Patch follows (could you merge it into your patch?):
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@571 f3766cd6-281f-0410-b1cd-43a5c92072e9
- I left LB_TAG_ intact because they are used by the payloads
- file renames are still missing. see next commit
- some lb_ renames might be missing. feel free to provide patches.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@564 f3766cd6-281f-0410-b1cd-43a5c92072e9
northbridge has several constructors, so it is required, if these
constructors
are to be compiled in to the running image, that a dts be provided.
To use the dts, one must add a /config/ line to the components
that use it, hence the change to the mainboard dts .
This change does not produce a working bios as far as I can tell.
But it is still important to have it in.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@555 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@542 f3766cd6-281f-0410-b1cd-43a5c92072e9
_MAINOBJECT #defined. Calls from all other files ended up in nirvana
because the compiler was not able to calculate the address of the
wrapper for the absolute call. The linker tried, but failed miserably.
Use the -combine flag and compile all of initram at once. This enables
GCC to calculate the address of the abscall wrapper, resulting in
working code.
Segher Boessenkool thinks the patched code works only by accident
because GCC has no way to specify generation of XIP code. According to
him, future GCC versions or other circumstances may break the code.
While this patch makes code work for now, it does NOT check whether the
generated code tries to write to memory outside the stack (general
writable data). That will of course fail, but I hope porters are smart
enough to avoid that.
Corey Osgood writes:
Great work tracking this down! This is okay for now, but we need to look
for a better solution in the future. Counting on porters who may or may
not remember this discussion to avoid something isn't good
future-proofing.
Checking the ELF sections for read-write data and stopping the build
with an error could make this future-proof.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@537 f3766cd6-281f-0410-b1cd-43a5c92072e9
may be due to miscompilation of XIP objects which do not have
_MAINBOBJECT defined. This issue was impossible to see on qemu because
no such object existed. Introduce initram_printktest.c in the Qemu
target, which will test for miscompilation and crash with a descriptive
error message.
This has been build tested and runtime tested on Qemu, and with my
compiler/linker combination it indeed crashes.
gcc (GCC) 4.2.1 (SUSE Linux)
GNU ld (GNU Binutils) 2.17.50.20070726-14 (SUSE Linux)
Trying with gcc-4.1 (GCC) 4.1.3 20070724 (prerelease) (SUSE Linux) and
the linker above had exactly the same results.
Unless we manage to fix the bug uncovered by this patch, leaving the
Qemu target in crashing state is the best thing we can do because this
behaviour mirrors the state of all other targets.
Ron says: I am comfortable with this. If hardware is broken, qemu should
be broken. I avidly wait the fix :-)
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@535 f3766cd6-281f-0410-b1cd-43a5c92072e9
across all of these makefiles. The rules are now in order of execution
during boot, that is:
STAGE0_MAINBOARD_OBJ
INITRAM_OBJ
STAGE2_MAINBOARD_OBJ
As added benefit, mainboard makefiles are now almost identical.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@533 f3766cd6-281f-0410-b1cd-43a5c92072e9
the x86 arch makefile. This makes porting to a new mainboard less
confusing.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@529 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@525 f3766cd6-281f-0410-b1cd-43a5c92072e9
and create a valid LAR header with an entry value. This will fix the
problems Ron is having on the ALIX 1C and probably allow it to boot.
It also sets the text base of the .o to 0, instead of whatever wacky
value gld is choosing, so all platforms will have the same value.
Get away from worrying about potential gld bugs, now and in the future.
As added benefit, we obsolete a lot of code without introducing
new code.
Qemu target entry point debugging has been added to be able to spot
problems with entry points in the future.
This patch is a joint work of Ron and Carl-Daniel.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@523 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@521 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@519 f3766cd6-281f-0410-b1cd-43a5c92072e9
Makefiles clean and simple.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@517 f3766cd6-281f-0410-b1cd-43a5c92072e9
had _SHARED defined during compilation, each of them would contain an
assignment of stage0_printk to *printk. During linking, this caused
errors as multiple definitions of printk existed.
Make sure _SHARED alone gives you only the printk prototype, and iff
_MAINOBJECT is defined as well, include the assignment.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@516 f3766cd6-281f-0410-b1cd-43a5c92072e9
probably be factored out together with the rest of the lines in
mainboard/* later, but for now it'll do.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@515 f3766cd6-281f-0410-b1cd-43a5c92072e9
post_code.c (thus drop it from console.h).
Instead, have console.h #include post_code.h and drop other
explicit #includes of post_code.h in the code; console.h is already
included in pretty much every file.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@513 f3766cd6-281f-0410-b1cd-43a5c92072e9
This fixes for example printk calls from initram code.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@505 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@502 f3766cd6-281f-0410-b1cd-43a5c92072e9
* statically link linuxbios.initram for now (depends on printk, post_code
and die)
* greatly simplify all makefiles by creating a global Rules.make
* use $(dir $@) in Makefiles instead of absolute paths for mkdir..
* clean up Makefiles by calling components' code locally instead of in the
Makefile. (Remember: one day, no code per mainboard)
* unconditionally create .xcompile in case it changed
* add NM to xcompile
* create $(obj)/linuxbios.map with all symbols of all stages
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@463 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@459 f3766cd6-281f-0410-b1cd-43a5c92072e9
- PCI_VENDOR_ID_CIRRUS
- PCI_DEVICE_ID_CIRRUS_5446
Some minor cosmetic fixes (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@447 f3766cd6-281f-0410-b1cd-43a5c92072e9
Will be re-added as soon as we support PowerPC in v3, of course.
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@442 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@416 f3766cd6-281f-0410-b1cd-43a5c92072e9
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@415 f3766cd6-281f-0410-b1cd-43a5c92072e9
all the early_*
stuff to stage1. All targets build and qemu boots.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@414 f3766cd6-281f-0410-b1cd-43a5c92072e9
of the data types of the individual array elements.
The macro is defined in lib.h, so code which uses it must include lib.h.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@413 f3766cd6-281f-0410-b1cd-43a5c92072e9
2. rename *_early_init symbols to *_stage1
3. Rename early_init to hardware_stage1
now people can see when things are supposed to happen.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@407 f3766cd6-281f-0410-b1cd-43a5c92072e9
stage 1. This is part of a general change in startup due to the move
from V2 to V3.
The LX is complex and in this case much work must be done, we don't
expect all platforms to be this way.
We will probably be changined these names from eary_* to stage1.c
to make it easier for people to know what's going on.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@406 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@404 f3766cd6-281f-0410-b1cd-43a5c92072e9
- Makefile corretion
- one last usage of msr_t (we hope)
Hmm, did we decide to add sdram directory? I will remove this -- it's a
mistake.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@402 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@397 f3766cd6-281f-0410-b1cd-43a5c92072e9
Get dbe61 initram into buildable shape. This depends
the msr_t patch which is in the pipeline.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@395 f3766cd6-281f-0410-b1cd-43a5c92072e9
Acked-by: Stefan Reinauer <stepan@coresystems.de
This patch adds artec dbe61 support, removes all mainboard.c, and
adds
the code to dtc so that it takes these properties from the top level
dts:
/{
.
.
.
mainboard-vendor = "AMD";
mainboard-part-number = "Norwich";
}
statictree.h will have:
extern const char *mainboard_vendor, *mainboard_part_number;
and statictree.c will have:
const char *mainboard_vendor = "AMD";
const char *mainboard_part_number = "Norwich";
It is an error to NOT have the vendor and part number in the top
level dts.
thanks
ron
Get rid of mainboard.c in all mainboard directories.
Modify dtc so that it creates declarations (in statictree.h) and
generates the char *
for mainboard name and part # (in statictree.c).
Failure to set up a mainboard-vendor
OR mainboard-part-number property in the mainboard dts will get a
helpful and descriptive error message (tested).
This may be a first for the linuxbios config
tools.
Add Georgi's patch for the bug in flattree.c; assign *cp = 0.
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@394 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@389 f3766cd6-281f-0410-b1cd-43a5c92072e9
NOTE: We're going to need to change the arch/x86 to have, e.g.,
arch/x86/geodelx. But we need to get lined up with the tree first.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@381 f3766cd6-281f-0410-b1cd-43a5c92072e9
