understandable. Added benefit is complaining loudly for
unsupported 2 GB DIMM size.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on the dbe62 up to and including Etherboot.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@671 f3766cd6-281f-0410-b1cd-43a5c92072e9
mathematically impossible condition of a value being above and below the
specified range at the same time. Change it to check for out-of-range.
arch/x86/geodelx/geodelx.c:set_delay_control() is missing a break, it
will keep going and mess up DRAM timings.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Both changes look right to me.
Acked-by: Marc Jones <marc.jones@amd.com>
The raminit in v2 was fixed in r2899 | rminnich | 2007-10-26 with this
log:
> The lxraminit change fixes a bug (&& used instead of ||) [...]
> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
> Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@659 f3766cd6-281f-0410-b1cd-43a5c92072e9
Set manual settings for dbe62 PLL; the auto settings are giving
slightly wrong values
Add call to dumplxmsr in dbe62 initram main()
Change dumplxmsr to void parameter
Add dumplxmsrs function to geodelx raminit support code
Correct spelling of CAS.
The big one: set spd variables correctly.
The not so big one: there is a bug in com2 enable I don't understand.
For now comment out two offending lines. The cs5536 debug prints
should be reduced later.
Change fuctory to factory. It's funny but confusing.
This patch also takes into account carl-daniel and uwe's comments.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@649 f3766cd6-281f-0410-b1cd-43a5c92072e9
This includes:
- the working power button patch.
- onchipuart2 for very early startup -- this will be replaced with a better mechanism soon.
- dts mod for powerbutton on cs5536
- dbe62 dts fix for COM1 setup
- ram check call in dbe62 initram.c
- Carl-Daniel's fix to detect incorrect access to spd variables.
- more debug prints in geodelx northbridge support code.
This is cumulative since we're lagging on acks a bit and it's hard to keep this
stuff all seperated out since it involves a common set of files. I'd like to get
it acked and in tree today if possible. It's a very small set of lines changed so please
forgive me for the cumulative nature.
Thanks
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@636 f3766cd6-281f-0410-b1cd-43a5c92072e9
in the pci dtc instead of the correct location in the domain.
Also fixed up some warnings on the const gliutable.
Tested on alix1c and boots to Linux, ethernet works. Still trying
to light up the display :-)
Signed-off-by: Marc Jones <marc.jones@amd.com>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@617 f3766cd6-281f-0410-b1cd-43a5c92072e9
Note: You MUST have the later AMD VSA code that does not call bios
interrupts. If you use the older code, your boot will hang at this
point:
buf[0x20] signature is b0:10:e6:80
Call real_mode_switch_call_vsm
With post code 10
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@616 f3766cd6-281f-0410-b1cd-43a5c92072e9
Carl-Daniel Hailfinger wrote:
> On 18.02.2008 23:55, Marc Jones wrote:
>> Carl-Daniel Hailfinger wrote:
>>> it seems that executing VSA requires vm86 to be useful. Since we
>>> unconditionally execute the VSA, we should unconditionally require
vm86
>>> support (PCI_OPTION_ROM_RUN_VM86) via Kconfig for Geode targets. Not
>>> doing so will either cause compile failures or runtime failures.
>>>
>>> Adding
>>> select PCI_OPTION_ROM_RUN_VM86
>>> below
>>> config CPU_AMD_GEODELX
>>> did not work out for me.
>> Sorry I missed this.
>>
>> VSA requires the GDT that is in vm86.c. VSA loads similar to an
option
>> ROM so the loader does go into VM86 mode. All the other stuff like
>> interrupt support and PCI BIOS isn't needed by VSA. I think that the
>> GDT at the top of vm86.c can be moved to a header file, gdt.h or
>> something like that.
>
> northbridge/amd/geodelx/vsmsetup.c uses
> util/x86emu/vm86.c:setup_realmode_idt() but it seems most/all of the
> setup there is not needed at all for VSA. Pulling in
setup_realmode_idt
> pulls in the rest of vm86 through direct and indirect dependencies.
>
>> Care to make a patch? :)
>
I am also leaning towards removing the IDT for VSA init. There is a risk
if either an exception happens or a software interrupt is used you will
get unexpected results. What probably happens is that you jump off to
something that will eventually cause a triple fault and reboot. You may
think this is bad (and it is) but it is the same risk that coreboot runs
today. If coreboot had a generic IDT to handle exceptions, VSA init
would use the same IDT. Note that hardware INT (even timers) should
never happen as they are always masked.
I have built with no PCI_OPTION_ROM_RUN_VM86 and run this to filo.
- Show quoted text -
Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones@amd.com
http://www.amd.com/embeddedprocessors
Reduce the amount of compilation errors for Geode LX targets if x86emu
or no emulation is selected instead of vm86.
Factor out GDT code from vm86.c to vm86_gdt.c
Remove IDT setup for VSA init.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-of-by: Marc Jones <marc.jones@amd.com>
This has booted to runlevel 3 and the ethernet works fine.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@613 f3766cd6-281f-0410-b1cd-43a5c92072e9
before they can be #included. That is completely counter-intuitive. Add
necessary #includes to the header files themselves.
Fix a few cases where nonexisting files were #included.
Compile tested on Qemu and Alix1C.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@611 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@608 f3766cd6-281f-0410-b1cd-43a5c92072e9
code boots and works on qemu and
alix1c. It represents a huge change and a huge improvement. There are a
few fixes left to do, which
will come once this is in.
This change started out easy: get the device IDs OUT of the the dts, and
into one place. We
decided the device IDs should be in the constructors ONLY. To make a
long story short, that just did
not work out, and it revealed a flaw in the design. The result?
- no more ids in the various dts files.
- the constructor struct is gone -- one less struct, nobody liked the
name anyway
- the device_operations struct now includes the device id.
- constructor property no longer used; use device_operations instead.
- lpc replaced with ioport
All the changes below stem from this "simple" change.
I am finding this new structure much easier to work with. I hope we're
done
on this for real, however!
TODO:
1. Change limitation in dtc that makes it hard to use hex in pci@
notation.
Now for the bad news. Sometime today, interrupts or io or something
stopped working between r596 and r602 -- but I did no commits at
that point. So something has gone wrong, but I don't think it's this
stuff.
I did try a build of HEAD, and it fails really, really badly. Much
more badly than this fails, so I think this commit is only going
to improve things. It does work fine on qemu, fails on alix1c,
so I suspect one of today's "clean up commits" broke something.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@603 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Builds and run to filo.
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@596 f3766cd6-281f-0410-b1cd-43a5c92072e9
in dts. This gets rid of the ugly pcipath etc. properties.
So, instead of
somedevice {pcipath="1,0";};
We say pci@1,0{ etc. etc. };
As per my agreement I agree to document this in the design doc.
The alix1c compiles but is untested, and will probably need some work.
I will do these additional tasks on friday.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
M include/device/path.h
Add LPC path type, replacing SUPERIO path type, since SUPERIO is only
one type of LPC. Clean up tabbing in parts of the file (cosmetic).
M mainboard/emulation/qemu-x86/dts
Modify this dts for the new path naming scheme.
M device/pci_device.c
Change what used to be a BIOS_ERR (but is no longer) to a BIOS_NOTICE.
The change is that the device tree includes more than just PCI devices,
so finding a non-PCI device is no longer fatal; a notice is useful.
M device/device_util.c
Add string creation for PCI_BUS nad LPC.
M northbridge/intel/i440bxemulation/dts
Add ID info for the chip.
M northbridge/intel/i440bxemulation/i440bx.c
Change initialization so it is explicitly for the .ops struct member.
M util/dtc/flattree.c
Add support for the new path naming scheme.
I'm in the middle of this commit so I'll fix the hard-coded lengths
next commit.
Also delete dead code between #if 0 and /* and //
M util/x86emu/vm86.c
comment out unused variables. these may someday be use, not ready
to delete them yet.
M Makefile
Change -O2 to -g. We need debugging on LAR far more than we need performance.
git-svn-id: svn://coreboot.org/repository/coreboot-v3@593 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@576 f3766cd6-281f-0410-b1cd-43a5c92072e9
Due to some problems with PCI transactions, Geode LX needs the ROM cache properties to be write-serialize + cache disabled by runtime. More details below.
Add mainboard_pre_payload() call to each mainboard as the final coreboot function before the payload is called by stage1.
Note that this patch also grows the bootblock from 16K to 20K to make room for mainboard_pre_payload().
"The problem is a transaction depth issue and bottlenecks inside the GX
and LX that go across PCI. The conditions are very complicated but it
comes down to we need write serialization for writes to PCI. If you
look in the data book you can't have write serialization and the cache
enabled on a given area. During coreboot we don't have to worry about
a write or a PCI bus master so I think we can enable caching the ROM.
After coreboot we can't be sure what will happen in the system so we
need to set it up to be safe. For example flashrom just clears the
write protect bit. If the cache were enabled (no write serialization)
and flashrom was writing the ROM we would be in a precarious position.
A PCI bus master doing a read or a write that has a hit on a tag
would cause enough bottleneck conditions that it might hit the bug. We
could change flashrom but that doesn't help other tools. We need to
leave the system in a safe state. Also, caching the ROM after it is no
longer used doesn't make much sense. So, we need a call just before
the payload runs to clean up the system."
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@573 f3766cd6-281f-0410-b1cd-43a5c92072e9
turn gets cache turned on much sooner. The system boots a bit faster.
We're still far too slow, perhaps because we are not caching ROM?
Index: arch/x86/Makefile
Add ../../northbridge/amd/geodelx/geodelxinit.o object
Index: arch/x86/geodelx/geodelxinit.c
add sizeram function.
Index: arch/x86/geodelx/stage1.c
add called to northbridge_init_early()
Index: northbridge/amd/geodelx/Makefile
remove geodelxinit.o object
Index: northbridge/amd/geodelx/geodelx.c
remove call to northbridge_init_early()
remove sizeram function.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@572 f3766cd6-281f-0410-b1cd-43a5c92072e9
released new-model VSA code.
Changes:
Index: util/dtc/flattree.c
Add an ID entry for apic properties.
Index: northbridge/amd/geodelx/apic
This is a new dts for the northbridge used as an APIC.
Index: northbridge/amd/geodelx/pci
This is a new dts for the northbridge used as a PCI device.
Index: northbridge/amd/geodelx/geodelx.c
Fix a non-obvious bug: we had set phase3 scan bus for both the
domain AND the PCI device, which is a mistake: can't scan from the
PCI device too.
Index: northbridge/amd/geodelx/domain
This is a new dts for the northbridge used as an pci domain.
Created via svn move dts domain
Index: device/pci_device.c
If there are leftover devices, it is now a warning, not an error,
since there are
some no-pci devices in the tree now. For future: only complain about
leftover PCI devices ...
Index: device/device.c
make devcnt a global and initialize it in init_dev. Add a debug printk.
Index: mainboard/pcengines/alix1c/dts
Add an 'apic' entry for the mainboard. This actually looks pretty clean
to me, the way it went in.
Index: northbridge/amd/geodelx/vsmsetup.c
Delete all pcibios int support, no longer needed for VSA.
Please note that this patch includes Carl-Daniel's improvements
below, which I have Ack-ed.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
A few minor comments. It would be great if you could address them before
committing.
northbridge/amd/geodelx/domain is a copy of northbridge/amd/geodelx/dts.
You probably want to use "svn mv" for that because it preserves history
and the old file was probably intended to have been moved, not copied.
northbridge/amd/geodelx/vsmsetup.c:247: warning: ‘biosint’ defined but
not used
Since the new VSA does not use BIOSINT services anymore, deleting
biosint and related functions from vsmsetup.c would shrink vsmsetup.c by
one fourth. Patch follows (could you merge it into your patch?):
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@571 f3766cd6-281f-0410-b1cd-43a5c92072e9
- I left LB_TAG_ intact because they are used by the payloads
- file renames are still missing. see next commit
- some lb_ renames might be missing. feel free to provide patches.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@564 f3766cd6-281f-0410-b1cd-43a5c92072e9
cosmetic comment as well.
We just did lots of coding work to make sure we could call vsmbios.
So let's actually call it!
P.S. If this is NOT considered a cosmetic comment, feel free to yell at
me :-)
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@563 f3766cd6-281f-0410-b1cd-43a5c92072e9
.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@562 f3766cd6-281f-0410-b1cd-43a5c92072e9
is running the VSA in the geode lx northbridge.
It builds but is not tested.
lar.h: make LAR functions SHARED
lar.c: make process_file non-static (i.e. global)
vsmsetup.c: modify to use LAR functions.
stage1.c: new function, init_archive, which is SHARED and will set up
the initial archive struct.
Note that some work remains. The use of unsigned longs and unsigned
shorts should be changed to u32/u16 as Carl-Daniel has pointed out,
Because this change requires changes elsewhere I am not including them
in this patch.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@561 f3766cd6-281f-0410-b1cd-43a5c92072e9
done, long term,
is to remove almost all of the vsmsetup.c file and use functions in the
vm86.c file.
The barrier to achieving that goal is the specialized nature of the vga
bios support code vs. the vsm bios support code.
There are a few issues to resolve but what I'd like
to do is get VSA working first, then work out how to merge the rest of
the code.
I have already done some merging at this point.
This code does not yet work. But the board does not work either, and I
want to get the code into the repo in case my hard drive dies.
Makefile: add vmsetup.o
vsmsetup.c: Add this file from v2. Fix copyright and includes.
Remove almost all assembly code in favor of code in vm86.c.
In future, almost all code will be removed and the vm86.c code used
instead.
vm86.c: make some assembly symbols .globl so that vsmsetup.c can use
them.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@560 f3766cd6-281f-0410-b1cd-43a5c92072e9
Remove old vendor,device struct members since we are now using the
device_id struct.
Change declaration of dev_find_device to use device_id struct.
device/device_util.c
Change dev_find_device to use device_id struct instead of vendor, device
parameters.
Add convenience function, dev_find_pci_device, to make it easier for
users.
device/pci_device.c
Change uses of dev->vendor and dev->device to dev->id.
Change prints of dev->vendor, dev->device to use the
dev_id_string function.
device/pci_rom.c
Change uses of dev->vendor and dev->device to dev->id.
southbridge/amd/cs5536/cs5536.c
Change uses of dev_find_device to dev_find_pci_device
southbridge/amd/cs5536/dts
Add pciid of the cs5536
northbridge/amd/geodelx/dts
add pciid of the geodelx northbridge.
util/x86emu/vm86.c
Change uses of dev_find_device to dev_find_pci_device
With these changes, the chipsetinit function now finds the southbridge
in the static tree, which is the first time this has worked in v3.
This success in turn means that the chipsetinit code is running for the
first time.
We are still failing in "Finding PCI configuration type"
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@558 f3766cd6-281f-0410-b1cd-43a5c92072e9
northbridge has several constructors, so it is required, if these
constructors
are to be compiled in to the running image, that a dts be provided.
To use the dts, one must add a /config/ line to the components
that use it, hence the change to the mainboard dts .
This change does not produce a working bios as far as I can tell.
But it is still important to have it in.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@555 f3766cd6-281f-0410-b1cd-43a5c92072e9
use it.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@544 f3766cd6-281f-0410-b1cd-43a5c92072e9
into lib/northbridgelib.c.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@534 f3766cd6-281f-0410-b1cd-43a5c92072e9
and hcf may move to a common library later.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@528 f3766cd6-281f-0410-b1cd-43a5c92072e9
post_code.c (thus drop it from console.h).
Instead, have console.h #include post_code.h and drop other
explicit #includes of post_code.h in the code; console.h is already
included in pretty much every file.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@513 f3766cd6-281f-0410-b1cd-43a5c92072e9
conformant, working) %llx in printk/printf.
While I'm at it, affected lines with 271 characters can be broken into
smaller chunks.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@479 f3766cd6-281f-0410-b1cd-43a5c92072e9
x86 config). This was tested with gcc 4.1.0 on x86 and gcc 4.2.1 on x86_64.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@466 f3766cd6-281f-0410-b1cd-43a5c92072e9
- Simplify lots of code, especially msr-related code.
- Move struct msrinit declaration into msr.h as we use it quite often
and there's no use to duplicate it again and again in each file.
- Remove unrequired variable usage (e.g. numEnabled, msrnum, val, port).
- Remove useless comments.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@464 f3766cd6-281f-0410-b1cd-43a5c92072e9
* statically link linuxbios.initram for now (depends on printk, post_code
and die)
* greatly simplify all makefiles by creating a global Rules.make
* use $(dir $@) in Makefiles instead of absolute paths for mkdir..
* clean up Makefiles by calling components' code locally instead of in the
Makefile. (Remember: one day, no code per mainboard)
* unconditionally create .xcompile in case it changed
* add NM to xcompile
* create $(obj)/linuxbios.map with all symbols of all stages
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@463 f3766cd6-281f-0410-b1cd-43a5c92072e9
- Use 'static' for functions and structs which are not meant to be public.
- Use 'const' for variables which are not meant to be modified.
- Move some prototypes into legacy.h where they belong.
- Drop prototypes for non-existing functions.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@460 f3766cd6-281f-0410-b1cd-43a5c92072e9
functions. Untested on real hardware, but it still compiles.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@446 f3766cd6-281f-0410-b1cd-43a5c92072e9
Instead of having lots of almost-empty Kconfig files all over the place,
we now collect all the "book-keeping" information (as opposed to real
LinuxBIOS configuration stuff) in one Kconfig file. The benefits are obvious.
Say we have (at some point in the future) 30 supported northbridges, 30
southbridges, and 30 Super I/O chips. That would make 90 useless Kconfig
files with just one or two lines in them, spread all over the place.
With this new approach we would instead have no additional Kconfig
files, just a list of all 90 supported chip(set)s in one Kconfig file.
For "real" config options we would still use Kconfig files in
(e.g.) southbridge/foo/bar/Kconfig, of course, which are manually "hooked"
into the config system in the top-level Kconfig file.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@441 f3766cd6-281f-0410-b1cd-43a5c92072e9
Instead unconditionally include _all_ northbridge/southbridge/superio
Makefiles, but put 'ifeq's in each of them to guard against including
unwanted contents.
This may sound like it's very slow when there are many Makefiles, but in
practice the speed difference is neglectable. A few ad hoc tests I did
showed no measurable speed differences at all (I used 30 or 40 sample
Makefiles).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@440 f3766cd6-281f-0410-b1cd-43a5c92072e9
- Makefile corretion
- one last usage of msr_t (we hope)
Hmm, did we decide to add sdram directory? I will remove this -- it's a
mistake.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@402 f3766cd6-281f-0410-b1cd-43a5c92072e9
Add a needed file.
remove misleading printk from i440bx.c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@401 f3766cd6-281f-0410-b1cd-43a5c92072e9
