* RPi4-RetroDreamer: copy RPi4 target
* RPi4-RetroDreamer: add device specific config
* RPi4: enable R8188EU driver
* RPi4*: symlink kernel configs for RPi4 variants to main device
* RPi4*: Enable CONFIG_USB_DWC2 for usb on CM4
* RPi4-RetroDreamer: patch Rock Candy autoconfig for built in controls
* RPi4-RetroDreamer: fix sound
* RPi4-RetroDreamer: use same Retroarch settings as PiBoyDmg
* RPi4-RetroDreamer: add to build_all.sh
* Misc cleanups for Nintendo Switch build, and Fix retroarch build issue, due to typo in lakka_switch patches.
* Disable joycon rumble on all boards, due to incorrect rumble mappings in driver could potentially cause damage to rumble device in joycons
* fix linux u-boot build under host gcc 10
Debian 11 has gcc 10, thus Lakka build failed.
port upstream patch to fix build issue is Debian 11.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e33a814e772cdc36436c8c188d8c42d019fda639
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* melonds depends on mesa on x86_64
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* python is python2
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Gamegirl: fix kernel build
vmlinux link to ko, thus fail to build.
config related driver to ko.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Gamegirl: set PKG_TOOLCHAIN to manual
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Gamegirl: build GL
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Gamegirl: fix bootload build
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* fix chailove build issue and enable it
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* build_all: remove some cache to make sure rebuild pass
when the previous build stops in the middle, must remove more to pass build.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* rpi4-aarch64: Add rpi4 aarch64 kernel config
This was created by copying the arm config and looking at the diff between:
https://github.com/raspberrypi/linux/blob/rpi-5.4.y/arch/arm/configs/bcm2711_defconfig
and
https://github.com/raspberrypi/linux/blob/rpi-5.4.y/arch/arm64/configs/bcm2711_defconfig
* rpi4-aarch64: Don't pass --enable-neon to retroarch as it makes the build fail
* rpi4-aarch64: Raspberry Pi dtb files are created in a different place for aarch64
* rpi4-aarch64: Build some rpi specific packages for aarch64 as well as arm
* rpi4-aarch64: RPi4 64-bit needs fixup4.dat to boot
I don't think this harms anything else
* rpi4-aarch64: Enable 64-bit mode and specify kernel filename in config.txt
This is a bit hacky.
We need to specify the kernel filename otherwise it expects it to be kernel8.img
* rpi4-aarch64: Fix RPi options for RPi4 aarch64
* rpi4-aarch64: update mupen64plus to aarch64 compatible version
* rpi4-aarch64: exclude cores that don't compile only for rpi-aarch64
* rpi4-aarch64: Update alsa-utils to overcome https://github.com/alsa-project/alsa-utils/issues/33
* rpi4-aarch64: Remove extra $ARCH arg from mk_arcade_joystick_rpi
* rpi4-aarch64: Fix ffmpeg compilation
* rpi4-aarch64: add new kernel conf
Created by copying the existing linux.arm.conf and applying the diffs between the official 32bit rpi kernel config and the official 64bit rpi kernel config
* rpi4-aarch64: improve kernel config
* rpi4: don't configure non-default audio_device
* Update mupen64plus_next
* rpi4-aarch64: turn off a load of debugging in the kernel
* Rpi4: Restructure and update rpi4 kernel to the latest 5.4.64
- New audio alsa config
- Increase gpu ram to 384mb
- Use the mesa 3d driver
* RPi4:Add bluez patch
* Bump bcm2835-driver
* Bump rpi-eeprom package to the latest
Bootloader version: 2020-09-03
VL805: 0138a1
* Bump rpi family bootloader
* rpi: use systemd for cpufreq tuning
Signed-off-by: Ian Leonard <antonlacon@gmail.com>
* Rpi4:Bump linux to v5.4.65
* Bump alsa-lib package to v1.2.3.1 and patch rpi4 hdmi support
Co-authored-by: Ian Leonard <antonlacon@gmail.com>
This fixes slice builds since upstream method to set xtal load capacitance
was backported in 4.19.82 stable
Signed-off-by: Matthias Reichl <hias@horus.com>
