to a board should add a defconfig in mainboard/vendor/board/defconfig.
I think that the defconfig should:
1. Use the ROM size that comes with the board
2. Enable compression
3. Not include a payload
This will make it easy for buildrom or anyone who wants to build it
manually to use lar to add their payloads. It also allows buildrom to
keep the configs in the coreboot tree.
The patch also adds mainboard/emulation/qemu-x86/defconfig
Signed-off-by: Myles Watson <myles@pel.cs.byu.edu>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@578 f3766cd6-281f-0410-b1cd-43a5c92072e9
Due to some problems with PCI transactions, Geode LX needs the ROM cache properties to be write-serialize + cache disabled by runtime. More details below.
Add mainboard_pre_payload() call to each mainboard as the final coreboot function before the payload is called by stage1.
Note that this patch also grows the bootblock from 16K to 20K to make room for mainboard_pre_payload().
"The problem is a transaction depth issue and bottlenecks inside the GX
and LX that go across PCI. The conditions are very complicated but it
comes down to we need write serialization for writes to PCI. If you
look in the data book you can't have write serialization and the cache
enabled on a given area. During coreboot we don't have to worry about
a write or a PCI bus master so I think we can enable caching the ROM.
After coreboot we can't be sure what will happen in the system so we
need to set it up to be safe. For example flashrom just clears the
write protect bit. If the cache were enabled (no write serialization)
and flashrom was writing the ROM we would be in a precarious position.
A PCI bus master doing a read or a write that has a hit on a tag
would cause enough bottleneck conditions that it might hit the bug. We
could change flashrom but that doesn't help other tools. We need to
leave the system in a safe state. Also, caching the ROM after it is no
longer used doesn't make much sense. So, we need a call just before
the payload runs to clean up the system."
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@573 f3766cd6-281f-0410-b1cd-43a5c92072e9
- I left LB_TAG_ intact because they are used by the payloads
- file renames are still missing. see next commit
- some lb_ renames might be missing. feel free to provide patches.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@564 f3766cd6-281f-0410-b1cd-43a5c92072e9
_MAINOBJECT #defined. Calls from all other files ended up in nirvana
because the compiler was not able to calculate the address of the
wrapper for the absolute call. The linker tried, but failed miserably.
Use the -combine flag and compile all of initram at once. This enables
GCC to calculate the address of the abscall wrapper, resulting in
working code.
Segher Boessenkool thinks the patched code works only by accident
because GCC has no way to specify generation of XIP code. According to
him, future GCC versions or other circumstances may break the code.
While this patch makes code work for now, it does NOT check whether the
generated code tries to write to memory outside the stack (general
writable data). That will of course fail, but I hope porters are smart
enough to avoid that.
Corey Osgood writes:
Great work tracking this down! This is okay for now, but we need to look
for a better solution in the future. Counting on porters who may or may
not remember this discussion to avoid something isn't good
future-proofing.
Checking the ELF sections for read-write data and stopping the build
with an error could make this future-proof.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@537 f3766cd6-281f-0410-b1cd-43a5c92072e9
may be due to miscompilation of XIP objects which do not have
_MAINBOBJECT defined. This issue was impossible to see on qemu because
no such object existed. Introduce initram_printktest.c in the Qemu
target, which will test for miscompilation and crash with a descriptive
error message.
This has been build tested and runtime tested on Qemu, and with my
compiler/linker combination it indeed crashes.
gcc (GCC) 4.2.1 (SUSE Linux)
GNU ld (GNU Binutils) 2.17.50.20070726-14 (SUSE Linux)
Trying with gcc-4.1 (GCC) 4.1.3 20070724 (prerelease) (SUSE Linux) and
the linker above had exactly the same results.
Unless we manage to fix the bug uncovered by this patch, leaving the
Qemu target in crashing state is the best thing we can do because this
behaviour mirrors the state of all other targets.
Ron says: I am comfortable with this. If hardware is broken, qemu should
be broken. I avidly wait the fix :-)
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@535 f3766cd6-281f-0410-b1cd-43a5c92072e9
across all of these makefiles. The rules are now in order of execution
during boot, that is:
STAGE0_MAINBOARD_OBJ
INITRAM_OBJ
STAGE2_MAINBOARD_OBJ
As added benefit, mainboard makefiles are now almost identical.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@533 f3766cd6-281f-0410-b1cd-43a5c92072e9
the x86 arch makefile. This makes porting to a new mainboard less
confusing.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@529 f3766cd6-281f-0410-b1cd-43a5c92072e9
and create a valid LAR header with an entry value. This will fix the
problems Ron is having on the ALIX 1C and probably allow it to boot.
It also sets the text base of the .o to 0, instead of whatever wacky
value gld is choosing, so all platforms will have the same value.
Get away from worrying about potential gld bugs, now and in the future.
As added benefit, we obsolete a lot of code without introducing
new code.
Qemu target entry point debugging has been added to be able to spot
problems with entry points in the future.
This patch is a joint work of Ron and Carl-Daniel.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@523 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@519 f3766cd6-281f-0410-b1cd-43a5c92072e9
Makefiles clean and simple.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@517 f3766cd6-281f-0410-b1cd-43a5c92072e9
had _SHARED defined during compilation, each of them would contain an
assignment of stage0_printk to *printk. During linking, this caused
errors as multiple definitions of printk existed.
Make sure _SHARED alone gives you only the printk prototype, and iff
_MAINOBJECT is defined as well, include the assignment.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@516 f3766cd6-281f-0410-b1cd-43a5c92072e9
This fixes for example printk calls from initram code.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@505 f3766cd6-281f-0410-b1cd-43a5c92072e9
* statically link linuxbios.initram for now (depends on printk, post_code
and die)
* greatly simplify all makefiles by creating a global Rules.make
* use $(dir $@) in Makefiles instead of absolute paths for mkdir..
* clean up Makefiles by calling components' code locally instead of in the
Makefile. (Remember: one day, no code per mainboard)
* unconditionally create .xcompile in case it changed
* add NM to xcompile
* create $(obj)/linuxbios.map with all symbols of all stages
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@463 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@459 f3766cd6-281f-0410-b1cd-43a5c92072e9
- PCI_VENDOR_ID_CIRRUS
- PCI_DEVICE_ID_CIRRUS_5446
Some minor cosmetic fixes (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@447 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@416 f3766cd6-281f-0410-b1cd-43a5c92072e9
all the early_*
stuff to stage1. All targets build and qemu boots.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@414 f3766cd6-281f-0410-b1cd-43a5c92072e9
Get dbe61 initram into buildable shape. This depends
the msr_t patch which is in the pipeline.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@395 f3766cd6-281f-0410-b1cd-43a5c92072e9
Acked-by: Stefan Reinauer <stepan@coresystems.de
This patch adds artec dbe61 support, removes all mainboard.c, and
adds
the code to dtc so that it takes these properties from the top level
dts:
/{
.
.
.
mainboard-vendor = "AMD";
mainboard-part-number = "Norwich";
}
statictree.h will have:
extern const char *mainboard_vendor, *mainboard_part_number;
and statictree.c will have:
const char *mainboard_vendor = "AMD";
const char *mainboard_part_number = "Norwich";
It is an error to NOT have the vendor and part number in the top
level dts.
thanks
ron
Get rid of mainboard.c in all mainboard directories.
Modify dtc so that it creates declarations (in statictree.h) and
generates the char *
for mainboard name and part # (in statictree.c).
Failure to set up a mainboard-vendor
OR mainboard-part-number property in the mainboard dts will get a
helpful and descriptive error message (tested).
This may be a first for the linuxbios config
tools.
Add Georgi's patch for the bug in flattree.c; assign *cp = 0.
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@394 f3766cd6-281f-0410-b1cd-43a5c92072e9
NOTE: We're going to need to change the arch/x86 to have, e.g.,
arch/x86/geodelx. But we need to get lined up with the tree first.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@381 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@370 f3766cd6-281f-0410-b1cd-43a5c92072e9
all header files.
This closes#40, as I think we don't need to invest time to fix this in
LinuxBIOSv2, but only in LinuxBIOSv3.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@332 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@325 f3766cd6-281f-0410-b1cd-43a5c92072e9
- Everything in include/cpu/generic/x86/arch/* goes into
include/arch/x86 now.
- include/cpu/generic/x86/div64.h moves into include/arch/x86, too.
- The former include/cpu/generic/x86/arch/elf.h moved to
include/arch/x86/archelf.h, as elf.h already exists in include/
and we must prevent a name clash.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@314 f3766cd6-281f-0410-b1cd-43a5c92072e9
get rid of a directory which only contains a single file, and
at the same time simplify the #includes and their hierarchies.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@313 f3766cd6-281f-0410-b1cd-43a5c92072e9
should be of type 'hex' instead of 'int'.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@292 f3766cd6-281f-0410-b1cd-43a5c92072e9
* add mc146818rtc runtime option code
* drop linuxbios_tables.h - its redundant (tables.h)
* add subsystem id support
* add option_table as a lar file
* fix a typo in xconfig
* clean up x86emu makefile
* add initial support for normal/fallback (incomplete)
* add back LBCHKSUM support in linuxbios table
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@287 f3766cd6-281f-0410-b1cd-43a5c92072e9
checks if they're GNU (by grepping for GNU in --version)
- use searchgnu to find objcopy, gnu ld, gnu as.
- set $(LEX) to flex
- add some search path to get whoami on solaris
- replace dnsdomainname with domainname if dnsdomainname is missing
- use $(OBJCOPY) instead of objcopy
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@284 f3766cd6-281f-0410-b1cd-43a5c92072e9
* include cleanup. We don't provide stdint.h, so use arch/types.h
instead.
* drop some unused variables
* fix comment style in some headers to match the template
* Fix the loglevel of some debugging output.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@275 f3766cd6-281f-0410-b1cd-43a5c92072e9
southbridge drivers in Kconfig.
* It includes initial superio code as well, but there is at least one
error in the pnp_device.c/superio scenario left
* Fixed biosemu.c, vm86.c, pnp_device.c (sort of)
* Enable vm86 instead of x86emu per default for vga init for now. This
makes VGA in qemu work. There might be a bug in x86emu or the compiler
I am using. (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux))
* Import isa-dma.c, keyboard.c and i8259.c from v2 /pc80, which was taken
from LinuxBIOSv1 released from LANL under release LA-CC Number 00-34
and using parts from the Linux kernel.
This patch makes vga and keyboard work in qemu. Yippie
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@260 f3766cd6-281f-0410-b1cd-43a5c92072e9
are used to from the Linux kernel.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@243 f3766cd6-281f-0410-b1cd-43a5c92072e9
further. It is only tested with my Kconfig build dir fixes applied.
Not sure how pretty this is. All the mkdirs increase build time by 0.2s,
so it looks a lot more nasty than it actually is. If wishes, we can create the
whole directory structure below build in the "prepare" target. It's not faster,
but more limited to one place.
The next step could be to spread out *_LIB_OBJ to lib/Makefile. in which case
it is nice that you can just write object.o instead of $(obj)/object.o or
$(obj)/lib/object.o ...
The top level modules (initram, stage0, stage2, ..) are still in $(obj).
So are the northbridge and southbridge object files - These require some more
cleanup anyways, as they're defined in the mainboard Makefile.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@242 f3766cd6-281f-0410-b1cd-43a5c92072e9
and drop setup_before_car.c.
The third part of the spring cleaning will get a proper patch to the
list at some point.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@237 f3766cd6-281f-0410-b1cd-43a5c92072e9
This tree shows the new model. It demonstrates the constructor array
in use, for devices that are and are not specified in the dts. It
introduces a new generic structure, device_id, analogous to
device_path, which can describe all the types of device IDs we have.
It shows a way to set up arrays of structs, in the dts, for the
constructors, so we avoid ldscript hacks.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@233 f3766cd6-281f-0410-b1cd-43a5c92072e9
Purely cosmetic change in the license header of
mainboard/emulation/qemu-x86/initram.c.
Constify constant strings.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@232 f3766cd6-281f-0410-b1cd-43a5c92072e9
Add "(LB) " to all log messages to differentiate them visually
from the rest of the boot messages. This is similar to what
Xen does when booting (it prefixes all log messages with "(XEN) ").
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@209 f3766cd6-281f-0410-b1cd-43a5c92072e9
