Feng Tang 552e450929 spi/dw_spi: refine the IRQ mode working flow ... Now dw_spi core fully supports 3 transfer modes: pure polling, DMA and IRQ mode. IRQ mode will use the FIFO half empty as the IRQ trigger, so each interface driver need set the fifo_len, so that core driver can handle it properly Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>		2010-01-20 13:49:45 -07:00
..
ad7877.h
ad7879.h
ads7846.h
at73c213.h
corgi_lcd.h
ds1305.h
dw_spi.h	spi/dw_spi: refine the IRQ mode working flow	2010-01-20 13:49:45 -07:00
eeprom.h
flash.h
Kbuild
libertas_spi.h
lms283gf05.h	backlight: spi driver for LMS283GF05 LCD	2009-09-07 15:08:06 +01:00
max7301.h
mc33880.h	gpio: add MC33880 driver	2009-09-23 07:39:46 -07:00
mcp23s08.h
mmc_spi.h
orion_spi.h
sh_msiof.h	spi: SuperH MSIOF SPI Master driver V2	2009-12-13 00:48:27 -07:00
spi.h	spi: handle TX-only/RX-only	2009-09-23 07:39:44 -07:00
spi_bitbang.h	tree-wide: fix typos "selct" + "slect" -> "select"	2009-11-09 09:40:56 +01:00
spi_gpio.h
spidev.h	spi: new spi->mode bits	2009-06-30 18:56:00 -07:00
tdo24m.h
tle62x0.h
wl12xx.h	wl1251: add NVS in EEPROM support	2009-11-18 17:09:24 -05:00
xilinx_spi.h	xilinx_spi: add support for the DS570 IP.	2009-12-08 18:48:14 -07:00