Christophe Ricard 35630df68d NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip ... Add driver for STMicroelectronics ST21NFCB NFC controller. ST21NFCB is using NCI protocol and a proprietary low level transport protocol called NDLC used on top. NDLC: The protocol defines 2 types of frame: - One type carrying NCI data (referred as DATAFRAME frames). - One type carrying protocol information used for flow control and error control mechanisms (referred as SUPERVISOR frames). After each frame transmission to the NFC controller, the device host SHALL waitfor an ACK (SUPERVISOR frame) reception before sending a new frame. The NFC controller MAY send a frame at anytime to the device host. The NFC controller MAY send a specific WAIT supervisor frame to indicate to device host that a NCI data packet has been received but that it could take significant time before the NFC controller sends an ACK and thus allows next data reception. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>		2014-07-23 00:49:28 +02:00
..
ad5449.h
ad5755.h
ad7266.h
ad7298.h
ad7303.h	iio:dac: Add support for the AD7303	2013-06-11 20:25:58 +01:00
ad7791.h
ad7793.h
ad7887.h
adau17x1.h	ASoC: Add ADAU1381/ADAU1781 audio CODEC support	2014-05-27 20:54:51 +01:00
adau1977.h	ASoC: Add ADAU1977 CODEC driver	2014-02-19 13:36:15 +09:00
ads7828.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h	ASoC: samsung: Remove invalid file reference	2014-02-25 21:29:26 +09:00
asoc-s3c24xx_simtec.h	ASoC: s3c24xx: Remove invalid file reference	2014-02-25 21:29:31 +09:00
asoc-ti-mcbsp.h	ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h	2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h	ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion	2014-01-07 15:36:09 +00:00
at24.h	misc: (at24) move header to linux/platform_data/	2013-09-30 06:02:34 +02:00
at91_adc.h	iio: adc: at91_adc: Add support for touchscreens without TSMR	2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h	ata: ata-samsung_cf: cleanup in header file	2014-02-19 14:52:52 +01:00
atmel.h	TTY/Serial driver patches for 3.16-rc1	2014-06-03 09:01:02 -07:00
bd6107.h	backlight: Add ROHM BD6107 backlight driver	2013-07-16 13:01:19 +09:00
brcmfmac-sdio.h	brcmfmac: abstract tx packet processing functions	2013-08-15 16:07:55 -04:00
bt-nokia-h4p.h	staging/bluetooth: Add hci_h4p driver	2014-02-07 10:13:53 -08:00
camera-mx1.h
camera-mx2.h
camera-mx3.h	[media] V4L2: mx3_camera: add support for asynchronous subdevice registration	2013-08-18 09:06:37 -03:00
camera-pxa.h
camera-rcar.h	[media] V4L2: soc_camera: Renesas R-Car VIN driver	2013-08-18 09:01:10 -03:00
clk-integrator.h	ARM: integrator: switch to fetch clocks from device tree	2014-02-13 11:20:42 +01:00
clk-lpss.h	ACPI / LPSS: register clock device for Lynxpoint DMA properly	2013-05-14 10:23:58 +05:30
clk-realview.h
clk-u300.h
clk-ux500.h	clk: ux500: Copy u8500_clk_init() ready for DT enablement	2013-09-26 11:05:26 +02:00
coda.h
crypto-atmel.h
crypto-ux500.h
cyttsp4.h	Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices	2013-06-30 21:24:21 -07:00
davinci_asp.h	ASoC: davinci-mcasp: Rename platform data struct	2014-02-03 18:26:59 +00:00
db8500_thermal.h
dma-atmel.h	dmaengine: at_hdmac: extend hardware handshaking interface identification	2013-07-05 11:40:29 +05:30
dma-coh901318.h
dma-ep93xx.h
dma-imx-sdma.h	dma: imx-sdma: Add sdma firmware version 2 support	2013-12-16 09:18:47 +05:30
dma-imx.h	dma: imx-sdma: Add new dma type for ssi dual fifo script	2013-12-16 09:18:48 +05:30
dma-mmp_tdma.h	dma: Cleanup dma-mmp_tdma.h header	2014-01-13 13:30:30 +05:30
dma-mv_xor.h	dma: mv_xor: Cleanup in dma-mv_xor.h header	2014-01-13 13:30:31 +05:30
dma-rcar-audmapp.h	shdma: add R-Car Audio DMAC peri peri driver	2014-03-29 19:38:09 +05:30
dma-rcar-hpbdma.h	dma: add driver for R-Car HPB-DMAC	2013-09-02 17:35:55 +05:30
dma-s3c24xx.h	ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442	2013-10-21 05:32:48 +09:00
dma-ste-dma40.h	dmaengine: ste_dma40: Allow memcpy channels to be configured from DT	2013-06-04 11:12:11 +02:00
dmtimer-omap.h
dsp-omap.h
dwc3-exynos.h
dwc3-omap.h
edma.h	ARM: edma: Remove redundant/unused parameters from edma_soc_info	2014-05-22 14:55:25 +05:30
efm32-spi.h	spi: new controller driver for efm32 SoCs	2013-08-09 17:32:57 +01:00
efm32-uart.h
ehci-sh.h
elm.h	mtd: nand: omap: add support for BCH16_ECC - ELM driver updates	2014-05-20 17:52:14 -07:00
emif_plat.h
eth-netx.h	net: Cleanup in eth-netx.h	2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h	Add support for GMT G762/G763 PWM fan controllers	2013-06-27 10:31:42 -07:00
gpio-davinci.h	gpio: remove obsolete tnetv107x driver	2014-03-05 10:44:44 +08:00
gpio-em.h	gpio: em: Add pinctrl support	2013-07-21 17:24:41 +02:00
gpio-lpc32xx.h	ARM: lpc32xx: move custom GPIO header	2013-12-03 11:26:06 +01:00
gpio-omap.h
gpio-rcar.h	gpio-rcar: Add RCAR_GP_PIN macro	2013-06-04 21:03:56 +09:00
gpio-ts5500.h
gpio_backlight.h	backlight: Add GPIO-based backlight driver	2013-07-16 13:01:05 +09:00
hwmon-s3c.h	hwmon: (s3c) Trivial cleanup in hwmon-s3c.h	2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h
i2c-davinci.h
i2c-imx.h
i2c-nuc900.h
i2c-s3c2410.h	i2c: s3c2410: Trivial cleanup in header file	2014-03-10 17:32:28 +01:00
ina2xx.h
intel-mid_wdt.h	watchdog: add Intel MID watchdog driver support	2014-06-10 21:48:16 +02:00
invensense_mpu6050.h
iommu-omap.h
ipmmu-vmsa.h	iommu: Add driver for Renesas VMSA-compatible IPMMU	2014-05-26 11:18:21 +02:00
irda-pxaficp.h
irq-renesas-intc-irqpin.h
irq-renesas-irqc.h
keyboard-pxa930_rotary.h
keyboard-spear.h
keypad-ep93xx.h	Input: keypad-ep93xx - cleanup header file	2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
keypad-omap.h	Input: keypad-omap - cleanup header file	2013-12-27 17:20:22 -08:00
keypad-pxa27x.h	Input: pxa27x-keypad - use matrix_keymap for matrix keys	2013-06-18 22:56:51 -07:00
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h	leds: kirkwood: Cleanup in header files	2014-01-27 17:28:51 -08:00
leds-kirkwood-ns2.h	leds: kirkwood: Cleanup in header files	2014-01-27 17:28:51 -08:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h	leds: lp55xx: handle enable pin in driver	2013-10-25 10:13:25 -07:00
leds-omap.h
leds-pca963x.h	leds-pca9633: Rename to leds-pca963x	2013-08-26 17:22:14 -07:00
leds-s3c24xx.h	leds: leds-s3c24xx: Trivial cleanup in header file	2014-02-27 09:57:11 -08:00
lm3630a_bl.h	backlight: lm3630: apply chip revision	2013-11-13 12:09:15 +09:00
lm3639_bl.h
lp855x.h	backlight: lp855x_bl: support new LP8555 device	2013-11-13 12:09:14 +09:00
lp8727.h
lp8755.h
lv5207lp.h	backlight: Add Sanyo LV5207LP backlight driver	2013-07-16 13:01:10 +09:00
macb.h
mailbox-omap.h	ARM: OMAP2+: add user and fifo info to mailbox platform data	2013-06-11 11:41:30 -05:00
max197.h	hwmon: (max197) add include guard	2014-01-14 21:36:53 -08:00
max3421-hcd.h	usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity	2014-05-29 11:19:30 -07:00
max6697.h
mfd-mcp-sa11x0.h	mfd: Cleanup mfd-mcp-sa11x0.h header	2014-01-21 08:28:59 +00:00
microread.h
mmc-davinci.h
mmc-esdhc-imx.h	mmc: sdhci-esdhc-imx: add delay line setting support	2013-10-21 15:58:13 -04:00
mmc-msm_sdcc.h	mmc: msm: Cleanup mmc-msm_sdcc.h header	2014-02-25 15:43:15 -05:00
mmc-mvsdio.h	mmc: mvsdio: Cleanup mmc-mvsdio.h header	2014-02-25 15:43:23 -05:00
mmc-mxcmmc.h
mmc-omap.h
mmc-pxamci.h	ARM: pxa: propagate errors from regulator_enable() to pxamci	2013-07-23 12:15:15 -07:00
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
msm_serial_hs.h
mtd-davinci-aemif.h	ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif	2014-02-23 20:33:18 +05:30
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h	mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates	2014-05-20 17:52:14 -07:00
mtd-nand-pxa3xx.h	mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding	2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h	mtd: nand: s3c2410: Trivial cleanup in header file	2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h	mtd: omap2: Cleanup header files	2014-01-11 11:39:18 -08:00
mtd-orion_nand.h	mtd: orion: Cleanup mtd-orion_nand.h header	2014-01-11 11:39:23 -08:00
mv_usb.h
net-cw1200.h	cw1200: rename the cw1200 platform definition header	2013-06-03 15:54:56 -04:00
ntc_thermistor.h
omap-twl4030.h
omap-wd-timer.h
omap1_bl.h
omap_drm.h
pca953x.h	gpio: (gpio-pca953x) move header to linux/platform_data/	2013-08-29 12:33:52 -07:00
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h	pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x.	2013-09-19 14:37:27 +02:00
pinctrl-single.h	pinctrl: single: Add support for auxdata	2013-10-10 15:30:47 -07:00
pn544.h	nfc: Fix FSF address in file headers	2013-12-11 10:56:21 -05:00
pxa2xx_udc.h
pxa_sdhci.h
rcar-du.h	drm/rcar-du: Rework output routing support	2013-08-09 23:17:52 +02:00
remoteproc-omap.h	remoteproc/omap: fix a sparse warning	2013-07-01 15:30:51 +03:00
s3c-hsotg.h
s3c-hsudc.h
sa11x0-serial.h
samsung-usbphy.h
sc18is602.h
serial-imx.h	serial: imx: Remove init() and exit() platform callbacks	2014-02-28 16:36:45 -08:00
serial-omap.h	SERIAL: OMAP: Remove the slave idle handling from the driver	2013-05-19 16:37:08 -06:00
serial-sccnxp.h	Revert "serial: sccnxp: Add DT support"	2013-08-02 15:25:19 +08:00
sh_ipmmu.h
shmob_drm.h
sht15.h	hwmon: (sht15) add include guard	2014-01-14 21:36:53 -08:00
shtc1.h	hwmon: add support for Sensirion SHTC1 sensor	2014-06-12 08:36:48 -07:00
si5351.h	clk: si5351: remove variant from platform_data	2014-01-27 11:20:22 -08:00
simplefb.h	fbdev changes for 3.12:	2013-09-05 09:49:32 -07:00
spi-clps711x.h
spi-davinci.h	ARM: davinci: move private EDMA API to arm/common	2013-06-18 10:52:03 +05:30
spi-ep93xx.h
spi-imx.h
spi-nuc900.h	spi: nuc900: Cleanup spi-nuc900.h header	2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h
spi-s3c64xx.h	spi/s3c64xx: Trivial cleanup in header file	2014-02-16 09:59:13 +08:00
ssm2518.h	ASoC: Add ssm2518 support	2013-05-25 10:33:30 -04:00
st21nfca.h	NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip	2014-04-22 00:37:25 +02:00
st21nfcb.h	NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip	2014-07-23 00:49:28 +02:00
st1232_pdata.h
st_sensors_pdata.h	iio: Added ST-sensors platform data to select the DRDY interrupt pin	2013-08-03 18:40:28 +01:00
syscon.h	mfd: syscon: Add platform data with a regmap config name	2014-05-15 17:02:19 +01:00
tegra_emc.h
touchscreen-s3c2410.h	Input: s3c2410 - trivial cleanup in header file	2014-02-14 00:09:43 -08:00
tsl2563.h
uio_dmem_genirq.h
uio_pruss.h
usb-davinci.h
usb-ehci-mxc.h
usb-ehci-orion.h	usb: ehci: Cleanup usb-ehci-orion.h header	2014-01-03 12:37:57 -08:00
usb-imx_udc.h
usb-musb-ux500.h	usb: musb: ux500: move channel number knowledge into the driver	2013-06-04 11:12:02 +02:00
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h
usb-omap1.h	usb: omap1: add extcon to platform data	2013-12-06 14:36:37 -06:00
usb-pxa3xx-ulpi.h
usb-rcar-gen2-phy.h	usb: phy: Add RCAR Gen2 USB phy	2013-10-10 11:59:48 -05:00
usb-rcar-phy.h	phy-rcar-usb: add R8A7778 support	2013-06-11 16:11:16 +09:00
usb-s3c2410_udc.h
usb3503.h	usb: misc: usb3503: Add to select the ports to disable	2013-05-30 21:32:52 +09:00
ux500_wdt.h
video-ep93xx.h	video: ep93xx: Cleanup video-ep93xx.h header	2014-01-17 10:57:41 +02:00
video-imxfb.h	video: imxfb: Remove unused fields from platform data structure	2014-02-28 12:35:22 +02:00
video-msm_fb.h	video: msm: Cleanup video-msm_fb.h header	2014-01-17 10:57:42 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h	video: pxa: Cleanup video-pxafb.h header	2014-01-17 10:57:42 +02:00
video_s3c.h
voltage-omap.h
vsp1.h	[media] v4l: vsp1: Add LUT support	2013-12-11 09:25:20 -02:00
wiznet.h
zforce_ts.h	Input: add driver for Neonode zForce based touchscreens	2013-10-31 08:46:08 -07:00