since version 3.5.1 users reported issues with 4K displays not
initializing on every boot. after reverting to kernel/fw version used in
Lakka v3.5 the issue seems to be gone.
* mesa: update to 21.3.6
https://docs.mesa3d.org/relnotes/21.3.6.html
* rpi: update kernel/firmware to 1.20220120
* linux: update mainline kernel to 5.10.101
* rpi: rebase patch for non standard modes in VEC
* Fix OGA builds
No need for the u-boot patch, update the INI files instead.
Added the new userspace mali G31 blob and update the build script (we
pull headers still from Rockchip repo).
Add the RTL8821 patch to fix linux build with newer GCCs too.
This makes OGAs bootable again (tested it on OGA Super)
* Adding aarch64 support
* u-boot: add the ability to specify the u-boot target to build
* u-boot: rebuild when UBOOT_TARGET changes
Co-authored-by: Lukas Rusak <lorusak@gmail.com>
Co-authored-by: Jonas Karlman <jonas@kwiboo.se>
* fix linux u-boot build under host gcc 10
Debian 11 has gcc 10, thus Lakka build failed.
port upstream patch to fix build issue is Debian 11.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e33a814e772cdc36436c8c188d8c42d019fda639
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* melonds depends on mesa on x86_64
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* python is python2
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Gamegirl: fix kernel build
vmlinux link to ko, thus fail to build.
config related driver to ko.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Gamegirl: set PKG_TOOLCHAIN to manual
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Gamegirl: build GL
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Gamegirl: fix bootload build
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* fix chailove build issue and enable it
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* build_all: remove some cache to make sure rebuild pass
when the previous build stops in the middle, must remove more to pass build.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* rpi4-aarch64: Add rpi4 aarch64 kernel config
This was created by copying the arm config and looking at the diff between:
https://github.com/raspberrypi/linux/blob/rpi-5.4.y/arch/arm/configs/bcm2711_defconfig
and
https://github.com/raspberrypi/linux/blob/rpi-5.4.y/arch/arm64/configs/bcm2711_defconfig
* rpi4-aarch64: Don't pass --enable-neon to retroarch as it makes the build fail
* rpi4-aarch64: Raspberry Pi dtb files are created in a different place for aarch64
* rpi4-aarch64: Build some rpi specific packages for aarch64 as well as arm
* rpi4-aarch64: RPi4 64-bit needs fixup4.dat to boot
I don't think this harms anything else
* rpi4-aarch64: Enable 64-bit mode and specify kernel filename in config.txt
This is a bit hacky.
We need to specify the kernel filename otherwise it expects it to be kernel8.img
* rpi4-aarch64: Fix RPi options for RPi4 aarch64
* rpi4-aarch64: update mupen64plus to aarch64 compatible version
* rpi4-aarch64: exclude cores that don't compile only for rpi-aarch64
* rpi4-aarch64: Update alsa-utils to overcome https://github.com/alsa-project/alsa-utils/issues/33
* rpi4-aarch64: Remove extra $ARCH arg from mk_arcade_joystick_rpi
* rpi4-aarch64: Fix ffmpeg compilation
* rpi4-aarch64: add new kernel conf
Created by copying the existing linux.arm.conf and applying the diffs between the official 32bit rpi kernel config and the official 64bit rpi kernel config
* rpi4-aarch64: improve kernel config
* rpi4: don't configure non-default audio_device
* Update mupen64plus_next
* rpi4-aarch64: turn off a load of debugging in the kernel
* Rpi4: Restructure and update rpi4 kernel to the latest 5.4.64
- New audio alsa config
- Increase gpu ram to 384mb
- Use the mesa 3d driver
* RPi4:Add bluez patch
* Bump bcm2835-driver
* Bump rpi-eeprom package to the latest
Bootloader version: 2020-09-03
VL805: 0138a1
* Bump rpi family bootloader
* rpi: use systemd for cpufreq tuning
Signed-off-by: Ian Leonard <antonlacon@gmail.com>
* Rpi4:Bump linux to v5.4.65
* Bump alsa-lib package to v1.2.3.1 and patch rpi4 hdmi support
Co-authored-by: Ian Leonard <antonlacon@gmail.com>
