mirror of
https://github.com/fail0verflow/switch-coreboot.git
synced 2025-05-04 01:39:18 -04:00
ee426cf54e
This patch increases the SPI clock for the ROM to 24.75MHz on all rk3288 (veyron) boards. This increases flash read speeds (and thereby decreases boot time) significantly, but we don't seem to get any more increases by going even higher. We have also seen occasional read failures at higher speeds in certain configurations, so this frequency seems to be the best option. BRANCH=veyron BUG=chrome-os-partner:38352 TEST=Booted on Jerry with Servo attached. Change-Id: I9bdb62eff169fe2be33558caafe9891668589372 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a1d07da4266f2922b076dfae8396c24c6a84252b Original-Change-Id: If3fd96c8cb5648d12fc4ee56fb6b6d5f3a0bf720 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/262645 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9889 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
78 lines
2.4 KiB
C
78 lines
2.4 KiB
C
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright 2014 Rockchip Inc.
|
|
* Copyright 2014 Google Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <arch/io.h>
|
|
#include <assert.h>
|
|
#include <bootblock_common.h>
|
|
#include <console/console.h>
|
|
#include <delay.h>
|
|
#include <reset.h>
|
|
#include <soc/clock.h>
|
|
#include <soc/i2c.h>
|
|
#include <soc/grf.h>
|
|
#include <soc/pmu.h>
|
|
#include <soc/rk808.h>
|
|
#include <soc/spi.h>
|
|
#include <vendorcode/google/chromeos/chromeos.h>
|
|
|
|
#include "board.h"
|
|
|
|
void bootblock_mainboard_early_init()
|
|
{
|
|
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
|
|
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
|
|
write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
|
|
}
|
|
|
|
}
|
|
|
|
void bootblock_mainboard_init(void)
|
|
{
|
|
if (rkclk_was_watchdog_reset())
|
|
reboot_from_watchdog();
|
|
|
|
/* Up VDD_CPU (BUCK1) to 1.4V to support max CPU frequency (1.8GHz). */
|
|
setbits_le32(&rk3288_pmu->iomux_i2c0scl, IOMUX_I2C0SCL);
|
|
setbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA);
|
|
assert(CONFIG_PMIC_BUS == 0); /* must correspond with IOMUX */
|
|
i2c_init(CONFIG_PMIC_BUS, 400*KHz);
|
|
|
|
/* Slowly raise to max CPU voltage to prevent overshoot */
|
|
rk808_configure_buck(1, 1200);
|
|
udelay(175);/* Must wait for voltage to stabilize,2mV/us */
|
|
rk808_configure_buck(1, 1400);
|
|
udelay(100);/* Must wait for voltage to stabilize,2mV/us */
|
|
rkclk_configure_cpu();
|
|
|
|
/* i2c1 for tpm */
|
|
write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
|
|
i2c_init(1, 400*KHz);
|
|
|
|
/* spi2 for firmware ROM */
|
|
write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
|
|
write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
|
|
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 24750*KHz);
|
|
|
|
/* spi0 for chrome ec */
|
|
write32(&rk3288_grf->iomux_spi0, IOMUX_SPI0);
|
|
rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 8250*KHz);
|
|
|
|
setup_chromeos_gpios();
|
|
}
|