mirror of
https://github.com/fail0verflow/switch-coreboot.git
synced 2025-05-04 01:39:18 -04:00
01368ed5ed
Some upstreaming patches missed that, so follow up. Change-Id: I28665c97ac777d8b0b0f909e64b32681ed2b98f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9771 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
78 lines
2.4 KiB
C
78 lines
2.4 KiB
C
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright 2014 Rockchip Inc.
|
|
* Copyright 2014 Google Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <arch/io.h>
|
|
#include <assert.h>
|
|
#include <bootblock_common.h>
|
|
#include <console/console.h>
|
|
#include <delay.h>
|
|
#include <reset.h>
|
|
#include <soc/clock.h>
|
|
#include <soc/i2c.h>
|
|
#include <soc/grf.h>
|
|
#include <soc/pmu.h>
|
|
#include <soc/rk808.h>
|
|
#include <soc/spi.h>
|
|
#include <vendorcode/google/chromeos/chromeos.h>
|
|
|
|
#include "board.h"
|
|
|
|
void bootblock_mainboard_early_init()
|
|
{
|
|
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
|
|
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
|
|
writel(IOMUX_UART2, &rk3288_grf->iomux_uart2);
|
|
}
|
|
|
|
}
|
|
|
|
void bootblock_mainboard_init(void)
|
|
{
|
|
if (rkclk_was_watchdog_reset())
|
|
reboot_from_watchdog();
|
|
|
|
/* Up VDD_CPU (BUCK1) to 1.4V to support max CPU frequency (1.8GHz). */
|
|
setbits_le32(&rk3288_pmu->iomux_i2c0scl, IOMUX_I2C0SCL);
|
|
setbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA);
|
|
assert(CONFIG_PMIC_BUS == 0); /* must correspond with IOMUX */
|
|
i2c_init(CONFIG_PMIC_BUS, 400*KHz);
|
|
|
|
/* Slowly raise to max CPU voltage to prevent overshoot */
|
|
rk808_configure_buck(1, 1200);
|
|
udelay(175);/* Must wait for voltage to stabilize,2mV/us */
|
|
rk808_configure_buck(1, 1400);
|
|
udelay(100);/* Must wait for voltage to stabilize,2mV/us */
|
|
rkclk_configure_cpu();
|
|
|
|
/* i2c1 for tpm */
|
|
writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
|
|
i2c_init(1, 400*KHz);
|
|
|
|
/* spi2 for firmware ROM */
|
|
writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk);
|
|
writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx);
|
|
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz);
|
|
|
|
/* spi0 for chrome ec */
|
|
writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0);
|
|
rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz);
|
|
|
|
setup_chromeos_gpios();
|
|
}
|