#
# LinuxBIOS config file for: VIA epia mini-itx
#

target /usr/src/epia

# via epia
mainboard via/epia
biosbase 0xffff0000

# setup delay using TSC
option CONFIG_UDELAY_TSC=1

# Enable Serial Console for debugging
option CONFIG_COMPRESS=0
option SERIAL_CONSOLE=1
option VIDEO_CONSOLE=1
option TTYS0_BAUD=115200

# For printk_debug, set level to 8
# for printk_info, set level to 7
#option DEFAULT_CONSOLE_LOGLEVEL=8
#option DEFAULT_CONSOLE_LOGLEVEL=7
option DEFAULT_CONSOLE_LOGLEVEL=6

#option DEBUG=1

option BOOT_IDE=1
option IDE_BOOT_DRIVE=0
#need to know size of partition table for ide
#option ONE_TRACK=32
option ONE_TRACK=63


# the logo is displayed for VIDEO_SHOW_LOGO seconds.
# Need to have to have a 128k rom since the logo image is at the
# beginning (0xfffe0000)
option VIDEO_SHOW_LOGO=10
option ROM_IMAGE_SIZE=131072
option PCX_FILE_LOCATION=0xfffe0000


# Use 256KB Standard Flash as Normal BIOS 
option RAMTEST=1

linux /usr/src/linux
commandline root=/dev/hda2 ro console=ttyS0,115200n8 console=tty1

#
# these actions put the pcx image file on the front of the bios.
# the image size is placed in the first 4 bytes then the pcx file
# important that ROM_IMAGE_SIZE be set to 128K or larger.
# The logo file is called linuxbioslogo.pcx and is by default located at
# src/pc80/linuxbioslogo.pcx.  
# Change the variable LOGOFILE below if you want to use your own file.
# See the file src/pc80/vga_load_pcx.c for details on the file format.
#
option LOGOFILE=$(TOP)/src/pc80/linuxbioslogo.pcx
addaction linuxbios.rom dd if=$(LOGOFILE) of=linuxbios.rom bs=1 seek=4 conv=notrunc;
addaction linuxbios.rom perl -e '@a=stat "$(LOGOFILE)";$$a=pack("L",$$a[7]); print $$a' | dd of=linuxbios.rom bs=1 conv=notrunc

# copy to home dir where flash programmer can reach.
addaction linuxbios.rom /bin/cp -f linuxbios.rom $(HOME)/cti/software/bios/exp/linuxbios_epia.bin