Add "(LB) " to all log messages to differentiate them visually
from the rest of the boot messages. This is similar to what
Xen does when booting (it prefixes all log messages with "(XEN) ").
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@209 f3766cd6-281f-0410-b1cd-43a5c92072e9
Remaining to be done:
PIRQ table
MP table
ACPI table
relocate the GDT reload to a sensible place -- or figure out if we even
need to bother; we're back to execute in place and the GDT is in flash
rom ==> we can leave it until we boot the payload I think.
At this point, however, we've got the basic bits to sensibly create
tables.
This has been tested and works on bochs.
It is working to a point, but still failing on qemu for reasons we don't
quite understand.
Elfboot
Found ELF candidate at offset 0
New segment addr 0x100000 size 0x21310 offset 0xc0 filesize 0x7348
(cleaned up) New segment addr 0x100000 size 0x7348 offset 0xc0
set 00100000 to 0 for 0 bytes
Copy to 00100000 from fffc3f24 for 29512 bytes
New segment addr 0x121320 size 0x48 offset 0x7420 filesize 0x48
(cleaned up) New segment addr 0x121320 size 0x48 offset 0x7420
set 00121320 to 0 for 0 bytes
Copy to 00121320 from fffcb284 for 72 bytes
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Jumping to boot code at 0x1047c0
FILO version 0.5 (rminnich@q.ccstar.lanl.gov) Sun Feb 25 10:19:16 MST
2007
collect_sys_info: boot eax = 0xfe
collect_sys_info: boot ebx = 0xffffd4ca
collect_sys_info: boot arg = 0x1047c0
collect_linuxbios_info: NOT Searching for LinuxBIOS tables...
Can't get memory map from firmware. Using hardcoded default.
collect_sys_info: 0000000000000000-00000000000a0000
collect_sys_info: 0000000000100000-0000000002000000
collect_sys_info: RAM 32 MB
relocate: Current location: 0x1000c7-0x12142e
relocate: Relocating to 0x1fdec90-0x1fffff7... ok
Press <Enter> for default boot, or <Esc> for boot prompt...
boot: hdc1:/phase1 root=/dev/hdc1 console=ttyS0,115200
malloc_check: invalid head->prev_size: 0x0
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@133 f3766cd6-281f-0410-b1cd-43a5c92072e9
resource .c functions -- sigh -- this will be next.
fix types, fix some usage, but we do not yet generate pirqi, mptables,
or acpi. This will be next.
This code will be called from phase6 in stage 2, and probably
attached to a cpu. Or, it will be inline in the stage2.c code, since
the need for tables is generic.
I'm also going to move the cryptic usage of lgdt from here to stage 2,
phase 2, of the cpu code. The device model improvements are making it
easier to think about when things happen, we are finding.
I'm going to get lunch and go see some of brussels. It's a miserable day
but ...
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@130 f3766cd6-281f-0410-b1cd-43a5c92072e9
We have merged the plethora of include files into one. A given linuxbios
target architecture must support all the functions described therein.
All the structs etc. in include/tables.h are known to be
architecture-independent.
We hope this new layout is easier to folow than the old one.
Todo: Remove the LGDT code from tables writing (how did THAT get in
there ;-) and put it somewhere sane; add OFW table support. We are going
to need some nice OFW table code.
Also, the license headers should be correct in this commit.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@128 f3766cd6-281f-0410-b1cd-43a5c92072e9
