diff --git a/src/mainboard/via/epia-m/STATUS b/src/mainboard/via/epia-m/STATUS deleted file mode 100644 index 6c9d41ab10..0000000000 --- a/src/mainboard/via/epia-m/STATUS +++ /dev/null @@ -1,27 +0,0 @@ -# These are keyword-value pairs. -# a : separates the keyword from the value -# the value is arbitrary text delimited by newline. -# continuation, if needed, will be via the \ at the end of a line -# comments are indicated by a '#' as the first character. -# the keywords are case-INSENSITIVE -owner: Andrew Ip -email: aip@cwlinux.com -#status: One of unsupported, unstable, stable -status: unstable -explanation: slow performance -flash-types: SST 39SF020A -payload-types: etherboot, memtest -# e.g. linux, plan 9, wince, etc. -OS-types: linux -# e.g. "Plan 9 interrupts don't work on this chipset" -OS-issues: -console-types: serial -# vga is unsupported, unstable, or stable -vga: unsupported -# Last-known-good follows the internationl date standard: day/month/year -last-known-good: 0/0/0000 -Comments: -Links: -Mainboard-revision: -# What other mainboards are like this one? List them here. -AKA: diff --git a/src/mainboard/via/epia-m/dumpdev.inc b/src/mainboard/via/epia-m/dumpdev.inc deleted file mode 100644 index dea330900a..0000000000 --- a/src/mainboard/via/epia-m/dumpdev.inc +++ /dev/null @@ -1,65 +0,0 @@ - /* Dump the first 64 longs for devfn 0, bus 0 - * i.e. the north bridge. - */ - -#define CS_WRITE_BYTE(addr, byte) \ - movl $addr, %eax ; \ - movl $byte, %edx ; \ - PCI_WRITE_CONFIG_BYTE - -#define CS_WRITE_WORD(addr, word) \ - movl $addr, %eax ; \ - movl $word, %ecx ; \ - PCI_WRITE_CONFIG_WORD - -#define CS_WRITE_LONG(addr, dword) \ - movl $addr, %eax ; \ - movl $dword, %ecx ; \ - PCI_WRITE_CONFIG_DWORD - -#define DEVFN(device, function) (((device) << 3) + (function)) -#ifndef CONFIG_ADDR -#define CONFIG_ADDR(bus,devfn,where) (((bus) << 16) | ((devfn) << 8) | (where)) -#endif - - jmp dumpdev_skip - .section ".rom.data" - -dd_banner: .string "dump device: " -dd_ret: .string "\r\n" -dd_done: .string "Done.\r\n" -dd_before: .string "Before setting values: \r\n" -dd_after: .string "After setting values: \r\n" - .previous - -# expects device devfn in %ecx - -dumpdev: - mov %esp, %ebp - CONSOLE_INFO_TX_STRING($dd_banner) - CONSOLE_INFO_TX_HEX32(%ecx) - CONSOLE_INFO_TX_STRING($dd_ret) -# xorl %ecx, %ecx -1: - CONSOLE_INFO_TX_HEX8(%cl) - CONSOLE_INFO_TX_CHAR($':') - CONSOLE_INFO_TX_CHAR($' ') - -2: - movl %ecx, %eax - PCI_READ_CONFIG_BYTE - CONSOLE_INFO_TX_HEX8(%al) - CONSOLE_INFO_TX_CHAR($' ') - - incl %ecx - testb $0xf, %cl - jnz 2b - - CONSOLE_INFO_TX_CHAR($'\r') - CONSOLE_INFO_TX_CHAR($'\n') - cmpb $0, %cl - jne 1b - CONSOLE_INFO_TX_STRING($dd_done) - mov %ebp, %esp - RETSP -dumpdev_skip: diff --git a/src/mainboard/via/epia-m/example.config b/src/mainboard/via/epia-m/example.config deleted file mode 100644 index 6e72081c87..0000000000 --- a/src/mainboard/via/epia-m/example.config +++ /dev/null @@ -1,31 +0,0 @@ -# -# LinuxBIOS config file for: VIA epia mini-itx -# - -target /opt/cwlinux/buildrom/epia - -# via epia -mainboard via/epia - -# Enable Serial Console for debugging -option SERIAL_CONSOLE=1 -option TTYS0_BAUD=115200 -option DEFAULT_CONSOLE_LOGLEVEL=9 -option DEBUG=1 - -# Use 256KB Standard Flash as Normal BIOS -option RAMTEST=1 -option USE_GENERIC_ROM=1 -option STD_FLASH=1 -#option ZKERNEL_START=0xfffc0000 -option ROM_SIZE=262144 - -# payload size = 192KB -option PAYLOAD_SIZE=196608 - -# use ELF Loader to load Etherboot -option USE_ELF_BOOT=1 - -# Use Etherboot as our payload -payload /opt/cwlinux/etherboot/src/bin32/via-rhine.ebi - diff --git a/src/mainboard/via/epia-m/irq_tables.c b/src/mainboard/via/epia-m/irq_tables.c deleted file mode 100644 index 63b79849c1..0000000000 --- a/src/mainboard/via/epia-m/irq_tables.c +++ /dev/null @@ -1,46 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include - -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*5, /* there can be total 5 devices on the bus */ - 0, /* Where the interrupt router lies (bus) */ - 0, /* Where the interrupt router lies (dev) */ - 0x1c20, /* IRQs devoted exclusively to PCI usage */ - 0, /* Vendor */ - 0, /* Device */ - 0, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ -#if 0 - 0x58, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - {0,0xa0, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x1, 0}, - {0,0x98, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x2, 0}, - {0,0x50, {{0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}}, 0x3, 0}, - {0,0x68, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0}, - {0,0x8, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0, 0}, - {0x50,0, {{0, 0}, {0, 0}, {0, 0}, {0, 0}}, 0, 0} - } -#else - 0xac, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* ethernet */ - {0,0x90, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x1, 0}, - /* usb */ - {0,0x80, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0}, - /* pci */ - {0,0xa0, {{0x1, 0xdeb8}, {0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}}, 0x3, 0}, - /* audio */ - {0,0x8d, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x0, 0}, - /* 1394 */ - {0,0x68, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0} - } -#endif -}; diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c deleted file mode 100644 index 578bccee36..0000000000 --- a/src/mainboard/via/epia-m/mainboard.c +++ /dev/null @@ -1,95 +0,0 @@ -#include -#include -#include -#include - -#include - -//static const unsigned char usbIrqs[4] = { 11, 5, 10, 12 }; -static const unsigned char usbIrqs[4] = { 11, 12, 10, 5 }; -static const unsigned char enetIrqs[4] = { 11, 5, 10, 12 }; -//static const unsigned char slotIrqs[4] = { 10, 12, 5, 11 }; -static const unsigned char slotIrqs[4] = { 12, 10, 5, 11 }; -static const unsigned char firewireIrqs[4] = { 12, 10, 5, 11 }; - -/* - Our IDSEL mappings are as follows - PCI slot is AD31 (device 15) (00:14.0) - Southbridge is AD28 (device 12) (00:11.0) -*/ -static void pci_routing_fixup(void) -{ - struct pci_dev *dev; - - dev = pci_find_device(PCI_VENDOR_ID_VIA, 0x3177, 0); - if (dev != NULL) { - /* - * initialize PCI interupts - these assignments depend - * on the PCB routing of PINTA-D - * - * PINTA = IRQ11 - * PINTB = IRQ12 - * PINTC = IRQ10 - * PINTD = IRQ5 - */ - pci_write_config_byte(dev, 0x55, 0xb0); - pci_write_config_byte(dev, 0x56, 0xac); - pci_write_config_byte(dev, 0x57, 0x50); - - } -#if 1 - // firewire built into southbridge - printk_info("setting firewire\n"); - pci_assign_irqs(0, 0x0d, firewireIrqs); - - // Standard usb components - printk_info("setting usb\n"); - pci_assign_irqs(0, 0x10, usbIrqs); - - // Ethernet built into southbridge - printk_info("setting ethernet\n"); - pci_assign_irqs(0, 0x12, enetIrqs); - - // PCI slot - printk_info("setting pci slot\n"); - pci_assign_irqs(0, 0x14, slotIrqs); - -#endif - - printk_debug("4d0: 0x%02x\n", inb(0x4d0)); - printk_debug("4d1: 0x%02x\n", inb(0x4d1)); -#if 0 - outb(0, 0x4d0); - outb(0, 0x4d1); -#endif - printk_debug("4d0: 0x%02x\n", inb(0x4d0)); - printk_debug("4d1: 0x%02x\n", inb(0x4d1)); -} - - -void -mainboard_fixup() -{ - printk_info("Mainboard fixup\n"); - - northbridge_fixup(); - southbridge_fixup(); -} - -void -final_southbridge_fixup() -{ - printk_info("Southbridge fixup\n"); - - nvram_on(); -// keyboard_on(); - pci_routing_fixup(); -} - -void -final_mainboard_fixup() -{ - printk_info("Final mainboard fixup\n"); - final_southbridge_fixup(); -} -